Top Tips Of 70-384 braindumps

Pass4sure 70-384 Questions are updated and all 70-384 answers are verified by experts. Once you have completely prepared with our 70-384 exam prep kits you will be ready for the real 70-384 exam without a problem. We have Latest Microsoft 70-384 dumps study guide. PASSED 70-384 First attempt! Here What I Did.


This Testaimer.com web site will certainly provide you with credible info concerning 70-384 exam dumps.

Q91. DRAG DROP - (Topic 6) 

You have a Lync Server 2013 infrastructure that contains two servers. The servers are configured as shown in the following table. 

You deploy two new servers. The servers are configured as shown in the following table. 

You need to recommend changes to the infrastructure to meet the following requirements: 

. Ensure that remote users can connect to the network by using Microsoft Lync 2013. . Ensure that Server3 authenticates the remote users before the users connect to a Front End Server. 

Which Lync Server 2013 server role should you recommend deploying to each server? 

To answer, drag the appropriate server role to the correct server in the answer area. Each server role may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content. 

Answer: 


Q92. - (Topic 12) 

You have a Lync Server 2013 infrastructure. 

A user named Executive1 has an assistant named Assistant1. Assistant1 is configured as a delegate and receives all of the calls for Executive1. 

You need to modify the current voice solution to meet the following requirements: 

. Ensure that some of the calls from other executives to Executive1 only ring on the Microsoft Lync 2013 client of Executive1. . Ensure that Executive1 can receive the calls from the other executives when his 

presence status is set to Do Not Disturb. 

What should you configure? 

A. Call Park 

B. A private line 

C. Simultaneous ring 

D. A response group 

Answer:


Q93. HOTSPOT - (Topic 12) 

You have a Lync Server 2013 infrastructure that has conferencing and Enterprise. 

You plan to optimize the traffic on the network for Enterprise Voice. You add information 

about the network sites and the network subnets. You need to enable media bypass for 

several of the network sites. 

Which node should you use from the Microsoft Lync Server 2013 Control Panel? 

To answer, select the appropriate node in the answer area. 

Answer: 


Q94. HOTSPOT - (Topic 12) 

You have an Active Directory domain named contoso.com. 

Your company has a Microsoft Office 365 subscription. Twenty users are enabled for Microsoft Lync Online. The users frequently travel. 

The users report that they receive the following error message when they attempt to sign in to Microsoft Lync from the office: "Cannot sign in because the server is temporarily unavailable. If the problem continues, please contact your support team." 

You verify that the users can sign in to Lync when they connect from the Internet. You need to ensure that all of the users can sign in to Lync. 

Which alias (CNAME) record should you create in the internal DNS domain? 

To answer, select the appropriate record name and the appropriate record target in the answer area. 

Answer: 


Q95. - (Topic 12) 

You have a Lync Server 2013 infrastructure. The infrastructure contains one central site. The infrastructure contains a Standard Edition server that has the Mediation Server role installed and is located in the central site. 

You configure a trunk to an IP-PBX. The IP-PBX is on the Unified Communications Open Interoperability program. 

You have 300 users who are enabled for Enterprise Voice. 

You need to provide PSTN services to the Enterprise Voice users if the IP-PBX fails. 

What should you do? 

A. Install a PSTN gateway that connects directly to the PSTN. Configure a new trunk to the new PSTN gateway. Create a new route and a new PSTN usage. Add the route to the PSTN usage and add the PSTN usage to the voice policy. 

B. Install a Survivable Branch Server that connects directly to the PSTN. Configure a new trunk and add the trunk to the existing route. Add the route to the PSTN usage and add the PSTN usage to the voice policy. 

C. Install a new trunk to a certified SIP trunk provider. Add the trunk to the existing PSTN usage. Add the PSTN usage to the voice policy. 

D. Install an additional IP-PBX that connects directly to the PSTN. Configure the existing trunk to use both IP-PBXs in resiliency mode. 

Answer:


Q96. - (Topic 1) 

You are evaluating the implementation of a reverse proxy for Contoso. 

You plan to create a certificate for the reverse proxy. 

You need to identify which names must be included in the certificate. 

Which three names should you identify? (Each correct answer presents part of the solution. Choose three.) 

A. lyncdiscover.contoso.com 

B. lyncdiscoverinternal.contoso.com 

C. meet.contoso.com 

D. pool1.contoso.com 

E. edge.contoso.com 

F. webext.contoso.com 

Answer: A,C,F 

Explanation: 

http://technet.microsoft.com/en-us/library/jj205381.aspx webext is the Subject Name and the Alternative Name with meet and lyncdiscover also listed as Alternative Names 


Q97. - (Topic 12) 

You have a Microsoft Exchange Server 2010 Service Pack 2 (SP2) organization and a Lync Server 2013 infrastructure. 

You need to design a Unified Messaging (UM) solution to meet the following requirements: 

. Support a peak concurrency of 500 calls. 

. Connect to two Lync Server 2013 pools. 

What is the minimum number of UM servers required? 

A. 1 

B. 2 

C. 3 

D. 5 

Answer:

Explanation: 

http://technet.microsoft.com/en-us/library/aa997637(v=exchg.141).aspx http://technet.microsoft.com/en-us/library/ee332331(v=exchg.141).aspx 


Q98. HOTSPOT - (Topic 12) 

Your company has two offices. The offices are located in Amsterdam and Seattle. The company has the phone number ranges shown in the following table. 

The range used for each office is shown in the following table. 

You plan to implement Lync Server 2013 and include an unassigned number range for each office. 

You need to identify which unassigned number ranges must be included. The solution must use the minimum amount of administrative effort when users are added to or removed from the infrastructure. 

Which number range should you use for each unassigned number range? 

Answer: 


Q99. HOTSPOT - (Topic 11) 

You need to design the dial plans for the Montreal and New York offices. The plans must meet the technical requirements. 

What should you include in the design? (To answer, select the appropriate pattern match and translation rule in the answer area.) 

Answer: 


Q100. HOTSPOT - (Topic 9) 

Your need to recommend which DNS records must be created to support the planned migration to Lync Online. 

Which DNS records should you recommend creating? 

To answer, configure the appropriate record name and target in the dialog box in the answer area. 

Answer: 

132. HOTSPOT - (Topic 9) 

You need to design the Call Park solution. 

Which Call Park design should you choose? 

To answer, select the appropriate range and application server in the dialog box in the 

answer area. 

Answer: 


70-384 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

Get it now →