Foolproof 70 412 exam dumps tips

Proper study guides for Renovate Microsoft Configuring Advanced Windows Server 2012 Services certified begins with Microsoft 70 412 vce preparation products which designed to deliver the Virtual 70 412 exam dumps questions by making you pass the examcollection 70 412 test at your first time. Try the free 70 412 dumps demo right now.


This Testaimer.com web site will certainly provide you with credible info concerning 70-412 exam dumps.

Q21. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC2 that runs Windows Server 2012 R2. DC2 has the DHCP Server server role installed. 

DHCP is configured as shown in the exhibit. (Click the Exhibit button.) 

You discover that client computers cannot obtain IPv4 addresses from DC2. 

You need to ensure that the client computers can obtain IPv4 addresses from DC2. 

What should you do? 

A. Disable the Deny filters. 

B. Enable the Allow filters. 

C. Authorize DC2. 

D. Restart the DHCP Server service 

Answer:

Explanation: 

From the exhibit we see a red marker on the IPv4 server icon. The DHCP server is not 

authorized. 

Authorize DHCP Server 

The final step is to authorize the server. 

Right-click your FQDN and select Authorize. 

Refresh the view by right-clicking your FQDN and selecting Refresh. 

You should now see green check mark next to IPv4. 

Example: 

Reference: Server 2012 DHCP Server Role 


Q22. Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. 

You are creating a central access rule named TestFinance that will be used to grant members of the Authenticated users group access to a folder stored on a Microsoft SharePoint Server 2013 server. 

You need to ensure that the permissions are granted when the rule is published. 

What should you do? 

A. Set the Permissions to Use the following permissions as proposed permissions. 

B. Set the Permissions to Use following permissions as current permissions. 

C. Add a Resource condition to the current permissions entry for the Authenticated Users principal. 

D. Add a User condition to the current permissions entry for the Authenticated Users principal. 

Answer:

Explanation: 

To create a central access rule (see step 5 below): In the left pane of the Active Directory Administrative Center, click Tree View, select Dynamic Access Control, and then click Central Access Rules. Right-click Central Access Rules, click New, and then click Central Access Rule. In the Name field, type Finance Documents Rule. In the Target Resources section, click Edit, and in the Central Access Rule dialog box, click Add a condition. Add the following condition: [Resource] [Department] [Equals] [Value] [Finance], and then click OK. In the Permissions section, select Use following permissions as current permissions, click Edit, and in the Advanced Security Settings for Permissions dialog box click Add. 

Note (not A): Use the following permissions as proposed permissions option lets you create the policy in staging. 

6. In the Permission entry for Permissions dialog box, click Select a principal, type Authenticated Users, and then click OK. 

Etc. 

Incorrect: 

Not A. Proposed permissions enable an administrator to more accurately model the impact 

of potential changes to access control settings without actually changing them. 

Reference: Deploy a Central Access Policy (Demonstration Steps) 

https://technet.microsoft.com/en-us/library/hh846167.aspx 


Q23. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed. 

A technician performs maintenance on Server1. 

After the maintenance is complete, you discover that you cannot connect to the IPAM server on Server1. 

You open the Services console as shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that you can connect to the IPAM server. 

Which service should you start? 

A. Windows Process Activation Service 

B. Windows Event Collector 

C. Windows Internal Database 

D. Windows Store Service (WSService) 

Answer:

Explanation: 

Explanation Windows Internal Database 

Windows Internal Database is a relational data store that can be used only by Windows 

roles and features. 

IPAM does not support external databases. Only a Windows Internal Database is 

supported. 

IPAM stores 3 years of forensics data (IP address leases, host MAC addresses, user 

login/logoff information) for 100,000 users in a Windows Internal Database. There is no 

database purge policy provided, and the administrator must purge data manually as 

needed. 

Incorrect: 

Not A. IPAM works even if the Windows Process Activation Service is not running. 

Not B. IPAM does not require the Windows Event Collector Service. It need to be running 

on the managed DC/DNS/DHCP computers. 

Not D. IPAM does not require the Windows Store Service. It provides infrastructure support 

for Windows Store.This service is started on demand and if disabled applications bought 

using Windows Store will not behave correctly. 

Reference: IPAM Deployment Planning 


Q24. You have a server named Server1 that runs Windows Server 2012 R2. 

Server1 fails. 

You identify that the master boot record (MBR) is corrupt. 

You need to repair the MBR. 

Which tool should you use? 

A. Bcdedit 

B. Bcdboot 

C. Bootrec 

D. Fixmbr 

Answer:

Explanation: 

Repairing an unbootable Windows installation with bootrec.exe If the boot/recovery partition is corrupted or lost, you can modify your Windows OS partition to boot. 

. Boot from your Windows Vista/7/Server2008/R2/2012 media and choose the 

"Repair Windows" option. . Open the command prompt. . Using diskpart, mark your Windows partition as bootable. . If your windows partition does not have it, copy the "boot" folder from the 

installation media. 

. Run the following commands: >c: >cd boot >attrib bcd -s -h -r >ren c:\\boot\\bcd bcd.old >bootrec /RebuildBcd Reboot and Windows should boot normally. If not, return to the command prompt and run: >bootrec /FixMBR >bootrec /FixBoot 

Incorrect: Not A. BCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, including creating new stores, modifying existing stores, adding boot menu options, and so on. BCDEdit serves essentially the same purpose as Bootcfg.exe on earlier versions of Windows Not B. The BCDboot tool is a command-line tool that enables you to manage system partition files Not D. Fixmbr is not a tool. Fixmbr is an option when using the bootrec tool. 

Reference: Windows BCD Store 

http://www.itsgotme.com/wiki/Windows_BCD 


Q25. Your network contains an Active Directory domain named contoso.com. The domain 

contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed. 

Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed. The Hyper-V Replica Broker currently runs on Server1. 

Server3 currently has no virtual machines. 

You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1. 

Which two tools should you use? (Each correct answer presents part of the solution. Choose two.) 

A. The Hyper-V Manager console connected to Server3 

B. The Failover Cluster Manager console connected to Server3 

C. The Hyper-V Manager console connected to Server1. 

D. The Failover Cluster Manager console connected to Cluster1 

E. The Hyper-V Manager console connected to Server2 

Answer: A,D 

Explanation: 

A. To configure the Replica server [on a server that is not part of a cluster which in this case is Server3] In Hyper-V Manager, click Hyper-V Settings in the Actions pane. In the Hyper-V Settings dialog, click Replication Configuration. 

In the Details pane, select Enable this computer as a Replica server. Etc. 

D. To configure a Replica server that is part of a failover cluster. 

1. In Server Manager, open Failover Cluster Manager. 

2. In the left pane, connect to the cluster, and while the cluster name is highlighted, click Roles in the Navigate category of the Details pane. 

3. Right-click the role and choose Replication Settings. 

4. In the Details pane, select Enable this cluster as a Replica server. Etc. 

Reference: Deploy Hyper-V Replica , Step 2: Enable Replication 

http://technet.microsoft.com/en-us/library/jj134240.aspx 


Q26. Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2. 

You create a user account named User1 in the domain. 

You need to ensure that User1 can use Windows Server Backup to back up Server1. The solution must minimize the number of administrative rights assigned to User1. 

What should you do? 

A. Add User1 to the Backup Operators group. 

B. Add User1 to the Power Users group. 

C. Assign User1 the Backup files and directories user right and the Restore files and directories user right. 

D. Assign User1 the Backup files and directories user right. 

Answer:

Explanation: 

Backup Operators have these permissions by default: 

However the question explicitly says we need to minimize administrative rights. Since the requirement is for backing up the data only--no requirement to restore or shutdown--then assigning the "Back up files and directories user right" would be the correct answer. 

Reference: Default local groups 

http://technet.microsoft.com/en-us/library/cc787956(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc756898(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc771990.aspx 


Q27. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012. 

Server1 is the enterprise root certification authority (CA) for contoso.com. 

You need to enable CA role separation on Server1. 

Which tool should you use? 

A. The Certutil command 

B. The Authorization Manager console 

C. The Certsrv command 

D. The Certificates snap-in 

Answer:

Explanation: 

To enable role separation 

. Open Command Prompt. 

. Type: certutil -setreg ca\\RoleSeparationEnabled 1 Etc. 

Reference: Enable role separation 


Q28. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed. 

The network contains client computers that run either Linux, Windows 7, or Windows 8. 

You have a zone named adatum.com as shown in the exhibit. (Click the Exhibit button.) 

You plan to configure Name Protection on all of the DHCP servers. 

You need to configure the adatum.com zone to support Name Protection. 

What should you do? 

A. Change the zone type. 

B. Sign the zone. 

C. Add a DNSKEY record. 

D. Configure Dynamic updates. 

Answer:

Explanation: 

Name protection requires secure update to work. Without name protection DNS names may be hijacked. 

You can use the following procedures to allow only secure dynamic updates for a zone. Secure dynamic update is supported only for Active Directory–integrated zones. If the zone type is configured differently, you must change the zone type and directory-integrate the zone before securing it for Domain Name System (DNS) dynamic updates. 

Enable secure dynamic updates: 

Reference: DHCP: Secure DNS updates should be configured if Name Protection is 

enabled on any IPv4 scope http://technet.microsoft.com/en-us/library/ee941152(v=ws.10).aspx 


Q29. HOTSPOT 

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. 

Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. Both servers connect to the same switch. 

Cluster1 hosts a secure web Application named WebApp1. WebApp1 saves user state information in a central database. 

You need to ensure that the connections to WebApp1 are distributed evenly between the nodes. The solution must minimize port flooding. 

What should you configure? To answer, configure the appropriate affinity and the appropriate mode for Cluster1 in the answer area. 

Answer: 


Q30. You have a server named FS1 that runs Windows Server 2012 R2. 

You install the File and Storage Services server role on FS1. 

From Windows Explorer, you view the properties of a shared folder named Share1 and you 

discover that the Classification tab is missing. 

You need to ensure that you can assign classifications to Share1 from Windows Explorer 

manually. 

What should you do? 

A. From Folder Options, select Show hidden files, folders, and drives. 

B. From Folder Options, clear Use Sharing Wizard (Recommend). 

C. Install the File Server Resource Manager role service. 

D. Install the Enhanced Storage feature. 

Answer:

Explanation: 

On the Classification tab of the file properties in Windows Server 2012, File Classification Infrastructure adds the ability to manually classify files. You can also classify folders so that any file added to the classified folder will inherit the classifications of the parent folder. 

Reference: What's New in File Server Resource Manager in Windows Server 


70-412 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

Get it now →