All About 200-125 training Jan 2017

200-125 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/200-125/

Our Cisco 200-125 exam merchandise contain study manual, Pdf files and examination engine. The particular study manual are shown chapter by chapter. If you have simply no idea to prepare for that Cisco 200-125 exam, you can understand all the required information from your 200-125 study manual. Both the actual Pdf files and examination engine software are free downloadable after purchasing. And the Pdf files are also printable along with essential for the actual Cisco Cisco exam preparation. The examination engine can easily create a true Cisco 200-125 environment.

2017 Jan 200-125 answers

Q151. - (Topic 7) 

Which will fix the issue and allow ONLY ping to work while keeping telnet disabled? 

A. Correctly assign an IP address to interface fa0/1. 

B. Change the ip access-group command on fa0/0 from "in* to "out. 

C. Remove access-group 106 in from interface fa0/0 and add access-group 115 in. 

D. Remove access-group 102 out from interface s0/0/0 and add access-group 114 in 

E. Remove access-group 106 in from interface fa0/0 and add access-group 104 in. 

Answer:


Q152. - (Topic 6) 

Refer to the exhibit. 

An attempt to deny web access to a subnet blocks all traffic from the subnet. Which interface command immediately removes the effect of ACL 102? 

A. no ip access-class 102 in 

B. no ip access-class 102 out 

C. no ip access-group 102 in 

D. no ip access-group 102 out 

E. no ip access-list 102 in 

Answer:


Q153. - (Topic 9) 

Which command can you use to set the hostname on a switch? 

A. switch-mdf-c1(config)#hostname switch-mdf1 

B. switch-mdf-c1>hostname switch-mdf1 

C. switch-mdf-c1#hostname switch-mdf1 

D. switch-mdf-c1(config-if)#hostname switch-mdf1 

Answer:


Q154. - (Topic 2) 

Which of the following are benefits of VLANs? (Choose three.) 

A. They increase the size of collision domains. 

B. They allow logical grouping of users by function. 

C. They can enhance network security. 

D. They increase the size of broadcast domains while decreasing the number of collision domains. 

E. They increase the number of broadcast domains while decreasing the size of the broadcast domains. 

F. They simplify switch administration. 

Answer: B,C,E 


Q155. - (Topic 4) 

Which command would you use on a Cisco router to verify the Layer 3 path to a host? 

A. tracert address 

B. traceroute address 

C. telnet address 

D. ssh address 

Answer:


Avant-garde 200-125 free practice test:

Q156. - (Topic 4) 

What are two benefits of using a single OSPF area network design? (Choose two.) 

A. It is less CPU intensive for routers in the single area. 

B. It reduces the types of LSAs that are generated. 

C. It removes the need for virtual links. 

D. It increases LSA response times. 

E. It reduces the number of required OSPF neighbor adjacencies. 

Answer: B,C 


Q157. - (Topic 2) 

Which command enables RSTP on a switch? 

A. spanning-tree uplinkfast 

B. spanning-tree mode rapid-pvst 

C. spanning-tree backbonefast 

D. spanning-tree mode mst 

Answer:


Q158. - (Topic 7) 

Scenario 

Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and 

SW2 are also connected to the routers R4 and R5. 

The EIGRP routing protocol is configured. 

You are required to troubleshoot and resolve the EIGRP issues between the various routers. 

Use the appropriate show commands to troubleshoot the issues. 

Router R6 does not form an EIGRP neighbor relationship correctly with router R1. What is the cause for this misconfiguration? 

A. The K values mismatch. 

B. The AS does not match. 

C. The network command is missing. 

D. The passive-interface command is enabled. 

Answer:


Q159. - (Topic 8) 

Refer to the exhibit. 

In the Frame Relay network, which IP addresses would be assigned to the interfaces with point-to-point PVCs? 

A. DLCI 16: 192.168.10.1 /24 

DLCI 17: 192.168.10.1 /24 

DLCI 99: 192.168.10.2 /24 

DLCI 28: 192.168.10.3 /24 

B. DLCI 16: 192.168.10.1 /24 

DLCI 17: 192.168.11.1 /24 

DLCI 99: 192.168.12.1 /24 

DLCI 28: 192.168.13.1 /24 

C. DLCI 16: 192.168.10.1 /24 

DLCI 17: 192.168.11.1 /24 

DLCI 99: 192.168.10.2 /24 

DLCI 28: 192.168.11.2 /24 

D. DLCI 16: 192.168.10.1 /24 

DLCI 17: 192.168.10.2 /24 

DLCI 99: 192.168.10.3 /24 

DLCI 28: 192.168.10.4 /24 

Answer:


Q160. - (Topic 8) 

Which two options are valid WAN connectivity methods? (Choose two.) 

A. PPP 

B. WAP 

C. DSL 

D. L2TPv3 

E. Ethernet 

Answer: A,C 



see more http://www.2passeasy.com/dumps/200-125 /