Resources to cisco 300 208

300-208 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

We provide real 300 208 sisas exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco cisco 300 208 Exam quickly & easily. The cisco 300 208 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 300 208 dumps dumps pdf and vce product and material, you can easily pass the ccnp security sisas 300 208 official cert guide pdf exam.

This web site will certainly provide you with credible info concerning 300-208 exam dumps

P.S. Highest Quality 300-208 item pool are available on Google Drive, GET MORE:

New Cisco 300-208 Exam Dumps Collection (Question 8 - Question 17)

Q8. Which two statements about administrative access to the ACS Solution Engine are true?

(Choose two.)

A. The ACS Solution Engine supports command-line connections through a serial-port connection.

B. For GUI access, an administrative GUI user must be created with the add-guiadmin command.

C. The ACS Solution Engine supports command-line connections through an Ethernet interface.

D. An ACL-based policy must be configured to allow administrative-user access.

E. GUI access to the ACS Solution Engine is not supported.

Answer: B,D

Q9. Which two switchport commands enable MAB and allow non-802.1X capable devices to immediately run through the MAB process? (Choose two.)

A. authentication order mab dot1x

B. authentication order dot1x mab

C. no authentication timer

D. dot1x timeout tx-period

E. authentication open

F. mab

Answer: A,F

Q10. Which two authentication stores are supported to design a wireless network using PEAP EAP-MSCHAPv2 as the authentication method? (Choose two.)

A. Microsoft Active Directory



D. RSA Secure-ID

E. Certificate Server

Answer: A,B

Q11. Which network component would issue the CoA?

A. switch

B. endpoint

C. Admin Node

D. Policy Service Node

Answer: D


The Secure-X company has recently successfully tested the 802.1X authentication deployment using the Cisco Catalyst switch and the Cisco ISEv1.2 appliance. Currently, each employee desktop is connected to an 802.1X enabled switch port and is able to use the Cisco AnyConnect NAM 802.1Xsupplicantto log in and connect to the network.

Currently, a new testing requirement is to add a network printer to the Fa0/19 switch port and have it connect to the network. The network printer does not support 802.1X supplicant. The Fa0/19 switch port is now configured to use 802.1X authentication only.

To support this network printer, the Fa0/19 switch port configuration needs to be edited to enable the network printer to authenticate using its MAC address. The network printer should also be on VLAN 9.

Another network security engineer responsible for managing the Cisco ISE has already per-configured all the requirements on the Cisco ISE, including adding the network printer MAC address to the Cisco ISE endpoint database and etc...

Your task in the simulation is to access the Cisco Catalyst Switch console then use the CLI to:

u2022 Enable only the Cisco Catalyst Switch Fa0/19 switch port to authenticate the network printer using its MAC address and:

u2022 Ensure that MAC address authentication processing is not delayed until 802.1Xfails

u2022 Ensure that even if MAC address authentication passes, the switch will still perform 802.1X authentication if requested by a 802.1X supplicant

u2022 Use the required show command to verify the MAC address authentication on the Fa0/19 is successful

The switch enable password is Cisco

For the purpose of the simulation, to test the network printer, assume the network printer will be unplugged then plugged back into the Fa0/19 switch port after you have finished the required configurations on the Fa0/19 switch port.

Note: For this simulation, you will not need and do not have access to the ISE GUI To access the switch CLI, click the Switch icon in the topology diagram


Review the explanation for full configuration and solution.


Initial configuration for fa 0/19 that is already done:

AAA configuration has already been done for us. We need to configure mac address bypass on this port to achieve the goal stated in the question. To do this we simply need to add this command under the interface:


Then do a shut/no shut on the interface. Verification:

Q13. A user configured a Cisco Identity Service Engine and switch to work with downloadable access list for wired dot1x users, though it is failing to work. Which command must be added to address the issue?

A. ip dhcp snooping

B. ip device tracking

C. dot1x pae authenticator

D. aaa authentication dot1x default group radius

Answer: B

Q14. Refer to the exhibit.

If the user matches the given TACACS+ profile on Cisco ISE, which command can the user enter from shell prompt on a Cisco switch?

A. enable

B. enable 10

C. show run

D. configure terminal

Answer: B

Q15. In the command 'aaa authentication default group tacacs local', how is the word 'default' defined?

A. Command set

B. Group name

C. Method list

D. Login type

Answer: C

Q16. Which feature must you configure on a switch to allow it to redirect wired endpoints to Cisco ISE?

A. the http secure-server command

B. RADIUS Attribute 29

C. the RADIUS VSA for accounting


Answer: A

Q17. In Cisco ISE 1.3, where is BYOD enabled with dual-SSID onboarding?

A. client provisioning policy

B. client provisioning resources

C. BYOD portal

D. guest portal

Answer: D

100% Renew Cisco 300-208 Questions & Answers shared by Examcollection, Get HERE: (New 310 Q&As)