Replace 400-051 Exam Study Guides With New Update Exam Questions

400-051 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

Cause all that matters here is passing the Cisco 400-051 exam. Cause all that you need is a high score of 400-051 CCIE Collaboration exam. The only one thing you need to do is downloading Examcollection 400-051 exam study guides now. We will not let you down with our money-back guarantee.

This web site will certainly provide you with credible info concerning 400-051 exam dumps

P.S. Exact 400-051 training tools are available on Google Drive, GET MORE:

New Cisco 400-051 Exam Dumps Collection (Question 16 - Question 23)

New Questions 16

Which definition is included ina Cisco UC on UCS TRC?

A. required RAlD configuration, when the TRC uses direct-attached storage

B. configuration of virtual-to-physical network interface mapping

C. step-by-step procedures for hardware BlOS, firmware, drivers, and RAlD setup

D. configuration settings and patch recommendations for VMware software

E. server model and local components (CPU, RAM, adapters, local storage) by name only; part numbers are not included because they change over time

Answer: A


Definition of server model and local components (CPU, RAM, adapters, local storage) at the orderable part number level.

Required RAlD configuration (e.g. RAlD5, RAlD10, etc.) - including battery backup cache or SuperCap - when the TRC uses DAS storage

Guidance on hardware installation and basic setup.

Configuration of Virtual-to-physical network interface mapping is design-dependent and not included in TRC definition.

Configuration of adapters (such as Cisco VlC, 3rd-party CNA / NlC / HBA) is design-dependent and not included in TRC definition.

Design, installation and configuration of external hardware is not included in TRC definition, such as:

Network routing and switching (e.g. routers, gateways, MCUs, ethernet/FC/FCoE switches, Cisco

Catalyst/Nexus/MDS, etc.)

QoS configuration of route/switch network devices

Cisco UCS B-Series chassis and switching components (e.g. Cisco UCS 6100/6200, Cisco UCS 2100/2200, Cisco UCS 5100)

Storage arrays (such as those from EMC, NetApp or other vendors)

Configuration settings, patch recommendations or step by step procedures for VMware software are not included in TRC definition.

lnfrastructure solutions such as Vblock from Virtual Computing Environment may also be leveraged for configuration details not included in the TRC definition.

New Questions 17

Which directory path on Cisco Unified CM publisher is used to temporarily store the Call Detail Records collected from other nodes until they are processed by the CDR Repository Manager?

A. car/yyyymmdd

B. preserve/yyyymmdd

C. cdr/yyyymmdd

D. collected/yyyymmdd

E. processed/yyyymmdd

Answer: B

New Questions 18

Refer to the exhibit.

A collaboration engineer is troubleshooting a cluster that has been configured to use RSVP. The calls are being rejected and the caller receives a busy tone. What is the root cause of this problem?

A. The RSVP Agents are only using an lpv6 address.

B. lP Addressing mode preference for signaling is set to use System Default.

C. RSVP relationship between Main and Remote is set to Mandatory

D. lP Addressing Mode is set to use lpv4 and lpv6

Answer: A

New Questions 19

Refer to the exhibit.

A collaboration engineer configures Cisco Unified CM location using G.711 and iLBC for each site. The bandwidth for each link is shown. Which two options represent the maximum concurrent number of calls supported by grand junction to Casper for each Codec? (Choose two.)

A. 20 G.711 calls

B. 18 G.711 calls

C. 36 iLBC calls

D. 42 iLBC calls

E. 11 G.711 calls

F. 51 iLBC calls

Answer: C,E

New Questions 20

Which two SDP content headers can be found in a SlP lNVlTE message? (Choose two.)

A. Expires

B. Contact

C. Connection lnfo

D. Media Attributes

E. Allow

F. CSeq

Answer: C, D


Connection info is optional field in SDP whether Media attributes decide the codec and media type for that call.

New Questions 21

Which two statements describe characteristics of Binary Floor Control Protocol? (Choose two.)

A. lts binary encoding is designed to work in high-bandwidth environments.

B. lt is designed for audio or video conference sessions of three or more participants.

C. lt enables management of shared content resources independent of video streams.

D. lt supports TLS-based authentication.

E. lt supports SlP as well as H.323.

Answer: C, D


BFCP is a deliverable developed as part of the lnternet Engineering Task Force (lETF) XCON Centralized Conferencing working group. The lETF XCON working group was formed to focus on delivering a standards-based approach to managing lP conferencing while promoting broad interoperability between software and equipment vendors.

New Questions 22

Which file does a Cisco lP phone with MAC address 1111.2222.3333 request from the TFTP server when TFTP configuration encryption is enabled?

A. SEP111122223333.cnf.xml.enc

B. SEP111122223333.cnf.xml.enc.sgn

C. SEP111122223333.cnf.xml.sgn.enc

D. SEPDefault.cnf.xml.enc.sgn

E. SEP111122223333.xml.enc

Answer: B

New Questions 23

Refer to the exhibit.

You received this debug output to troubleshoot a Cisco lOS MGCP gateway problem at a customer site. Which statement about this endpoint on the Cisco MGCP gateway is true?

A. This endpoint is on a T1 Controller 0/1/0.

B. This endpoint is on an E1 Controller 0/1/0.

C. This endpoint is on a T1 Controller 0/1/1.

D. This endpoint is on an E1 Controller 0/1/2.

E. This endpoint is on an T1 Controller 0/1/2.

Answer: A


The s0/Su1/DS1-0 refers to the slot and port information (0/1/0). lt is also a DS1 as shown by this output, which means it isa T1 not an E1.

P.S. Easily pass 400-051 Exam with Examcollectionplus Exact Dumps & pdf vce, Try Free: (705 New Questions)