[Up to the minute] ccie service provider written exam dumps

400-201 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/400-201/

Our Cisco 400-201 exam demos include two versions: Pdf(printable version) and Test Motor(software version). They are very convenient and helpful to suit your needs to make total preparation for the 400-201 real exam. Our Pdf or even Testing engine preparation materials involving Cisco Cisco certification exam contain everything which can be precise and logical that you just need inside the exam. You can freely download the particular Pdf files and test engine on the PC after buy. Make total use of the particular comprehensive Cisco Cisco practice questions which are tested simply by our certified experts before publishing and pass your 400-201 exam properly at 1st attempt.

2017 Jan 201-400:

Q101. Refer to the exhibit. A customer is running IS-IS within a network and is using BGP as a CE-PE routing protocol. Which action allows CE1 to get the subnet 10.10.2.0/24 over the CE1-PE1 link, regardless of whether there is a flap in the MPLS link or backdoor link? 

A. Configure the neighbor <PE1-IP>weight 33768 command on CE1 under the BGP process. 

B. Configure the distance bgp 115 200 200 command on CE1 under the BGP process. 

C. Configure the distance 30 ip command on CE1 under the IS-IS process. 

D. Configure the distance bgp 115 200 200 command on CE2 under the BGP process. 

E. Configure the neighbor <PE1-IP>weight 33768 command on CE2 under the BGP process. 

Answer:


Q102. Refer to the exhibit. 

A service provider has multiple time sources in the environment for NTP. The time source at 10.0.4.1 is intended to be seen as a primary time source. What command can be issued on PE4 to fix the configuration, ensuring the proper NTP source will be issued? 

A. ntp peer 10.0.4.1 

B. ntp peer 10.0.4.1 prefer 

C. ntp server 10.0.4.1 source GigabitEthernet0/0 

D. ntp server 10.0.4.1 prefer 

Answer:

Explanation: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_3ntp.html#wp1106725 


Q103. Which are the two fundamental ways in which IEEE 1588 differs from SyncE? (Choose two.) 

A. In addition to frequency synchronization, it achieves ToD synchronization to achieve phase alignment which is required for multi-channel communication. 

B. It is a purely-based solution, with the actual clock values being passed inside the payloads of special packets dedicated to that task. 

C. It offers two major changes over traditional Ethernet to make it suitable for clock distribution: a mandated clock accuracy and the ESMC protocol for clock selection, distribution, management, traceability, and failover. 

D. SyncE is a Cisco proprietary ToD technology where IEEE 1588 is a industry standard recommended for interoperability across vendor devices. 

E. IEEE 1588 applies to voice-only systems or with low-bandwidth data traffic. 

Answer: A,B 

Explanation: http://www.eetimes.com/document.asp?doc_id=1278660 


Q104. A network engineer needs to connect two core switches that use Gigabit Ethernet interfaces in an MPLS backbone and that are separated by a distance of 60 km. Which Cisco GBIC achieves this goal? 

A. Cisco 1000BASE-T GBIC 

B. Cisco 1000BASE-SX GBIC 

C. Cisco 1000BASE-LX/LH GBIC 

D. Cisco 1000BASE-ZX GBIC 

Answer:

Explanation: 

http://www.cisco.com/web/partners/downloads/765/tools/quickreference/gbic.pdf 


Q105. Refer to the exhibit. An MPLS Layer 3 VPN service has been provisioned for a customer. What will be the ToS value at Site-B for the exceeded traffic that it is sent from Site-A with ToS 2? 

A. 0 

B. 2 

C. 3 

D. 4 

E. No exceeded traffic will reach Site-B. 

Answer:


Rebirth thendral 201-400:

Q106. Refer to the exhibit. 

IS-IS configuration has been deployed using the default IS-IS metric value and default IS-IS metric-style. The SP decides to implement MPLS TE in all routers, except R5. In order to maintain IS-IS adjacency between R3 and R5 without impacting reachability, which command should be configured on R3 router under the IS-IS process? 

A. metric-style narrow 

B. metric-style wide 

C. metric-style narrow transition 

D. metric-style transition 

Answer:


Q107. Two switches are connected back-to-back using two Gigabit Ethernet interfaces. These two interfaces are assigned to a port channel in VLAN trunk mode. Which configuration sequence allows the addition of a new VLAN in this link? 

A. Add the VLAN to the port channel only, and remove it from the individual links. 

B. Add the VLAN to both the port channel and individual links. 

C. Add the VLW to the port channel only, and it will be reflected on the individual links. 

D. Add the VLAN to the individual links, and it will be reflected on the port channel. 

Answer:


Q108. Refer to the exhibit. 

Customer ABC is peering with two service providers for Internet Access In order to prevent the AS100 from becoming a transit AS between ISP_1 and ISP_2 Which BGP configuration must be applied to achieve this goal? 

A. CE1# 

ip as-path access-list 1 permit ^$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.2.2 route-map LOCAL_ONLY in 

CE2# 

ip as-path access-list 1 permit ^$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.1.2 route-map LOCAL-ONLY in 

B. CE1# 

ip as-path access-list 1 permit ^11$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

, router bgp 100 

neighbor 1.1.1.2 route-map LOCAL_ONLY out 

CE2# 

ip as-path acctss-list 1 permit ^22$ 

router-map LOCAL.ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.1.2 routt-map LOCAL_ONLY out 

C. CE1# 

ip as-path access-list 1 permit ^$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.2.2 route-map LOCAL_ONLY out 

CE2# 

ip as-path access-list 1 permit ^$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.1.2 route-map LOCAL_ONLY out 

D. CE1# 

ip as-path access-list 1 permit ^100$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.2.2 route-map LOCAL_ONLY out 

CE2# 

ip as-path access-list 1 permit ^100S 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.1.2 route-map LOCALJDNLY out 

Answer:


Q109. Refer to the exhibit. 

Which VLAN interface does untagged traffic pass through? 

A. 1 

B. 2 

C. 3 

D. 4 

Answer:


Q110. QoS is applied on an outgoing interface as shown below: 

What will the QoS result be for egress traffic with an average queue depth of 40 that is marked as DSCP AF32? 

A. Traffic will be dropped with a random rate less than the one defined by MPD. 

B. All traffic will be tail dropped. 

C. Traffic will be dropped with a rate of 1 packet out of 20. 

D. Traffic will be dropped with a rate of 1 packet out of 30. 

Answer:



see more http://www.2passeasy.com/dumps/400-201 /