Microsoft 70-740 Dumps 2019

70-740 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/70-740/

Want to know 70-740 dumps features? Want to lear more about 70-740 exam experience? Study 70-740 dumps. Gat a success with an absolute guarantee to pass Microsoft 70-740 (Installation, Storage, and Compute with Windows Server 2016) test on your first attempt.

Free demo questions for Microsoft 70-740 Exam Dumps Below:

NEW QUESTION 1
For Windows Server 2016, Nano Server is distributed on the physical media, where you will find a
NanoServer folder; this contains a .wim image and a subfolder called Packages. It is these package files that you use to add server roles and features to the VHD image, which you then boot to.
Assume that several variables have been configured already, which PowerShell command would you use to create a Nano Server which had the Hyper-V role, clustering, OEM Drivers and antimalware?

  • A. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath - ComputerName $computername -OEMDrivers -Clustering -Defender -Compute
  • B. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath - ComputerName $computername -OEMDrivers -Clustering -Storage -EnableRemoteManagementPort
  • C. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath - ComputerName $computername -OEMDrivers -Defender -Containers - EnableRemoteManagementPort
  • D. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath - ComputerName $computername -Defender -Storage -Compute - EnableRemoteManagementPort

Answer: A

NEW QUESTION 2
Your Network contains one Active Directory domain named contoso.com. You pilot DirectAccess on the network.
During the pilot deployment, you enable DirectAccess only for a group Contoso\Test Computers. Once the pilot is complete, you need to enable DirectAccess for all the client computers in the domain.
What should you do?

  • A. From Windows PowerShell, run the Set-DAClient cmdlet.
  • B. From Windows PowerShell, run the Set-DirectAccess cmdlet.
  • C. From Active Directory Users and Computers, modify the membership of the Windows Authorization Access Group.
  • D. From Group Policy Management, modify the security filtering of an object named Direct Access Client Setting Group Policy.

Answer: D

NEW QUESTION 3
DRAG DROP
You are deploying DirectAccess to a server named DA1. Da1 will be located behind a firewall and will have a single network adapter The intermediary network will be IPv4.
You need to configure firewall to support DirectAccess.
Which firewall rules should you create for each type of traffic? To answer, drag the appropriate ports and protocols to the correct traffic types. Each port and protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content
70-740 dumps exhibit

    Answer:

    Explanation: 70-740 dumps exhibit

    NEW QUESTION 4
    You have a server named Server1 that runs Windows Server 2016. Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
    You create a virtual disk named Disk 1 that uses a mirrored layout.
    You create a partition named Partition1 that uses all of the available space on Disk 1. You need to extend Partition1.
    What should you do first?

    • A. From Windows PowerShell, run the Resize-VirtualDisk cmdlet.
    • B. From Windows PowerShell, run the Resize-StorageTier cmdlet.
    • C. From Windows PowerShell, run the Expand-IscsiVirtualDisk cmdlet.
    • D. From Disk Management, modify the properties of Partition1.

    Answer: A

    NEW QUESTION 5
    DRAG DROP
    You have a physical server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host On Server1, you create a virtual machine named VM1 that runs Windows Server 2016.
    You plan to install the Hyper-V server role on VM1.
    You need to ensure that you can configure VM1 to host virtual machines
    How should you complete the Windows PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
    70-740 dumps exhibit

      Answer:

      Explanation: 70-740 dumps exhibit

      NEW QUESTION 6
      HOTSPOT
      Your network contains an Active Directory forest named contoso.com. You need to add a new domain named fabrikam.com to the forest.
      What command should you run? To answer, select the appropriate options in the answer area.
      70-740 dumps exhibit

        Answer:

        Explanation: 70-740 dumps exhibitExplanation:
        References:
        https://technet.microsoft.com/en-us/library/hh974722(v=wps.630).aspx

        NEW QUESTION 7
        HOTSPOT
        You have a server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host
        You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA) - capable.
        You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards
        Which command should you run first? To answer, select the appropriate options in the answer area.
        70-740 dumps exhibit

          Answer:

          Explanation: 70-740 dumps exhibit

          NEW QUESTION 8
          You have two servers named Server1 and Server2. A firewall exists between Server1 and Server2. Both servers run Windows Server Update Services (WSUS). Server1 downloads updates from Microsoft update.
          Server2 must synchronize updates from Server1. Which port should to open on the firewall?

          • A. 80
          • B. 443
          • C. 3389
          • D. 8530

          Answer: D

          NEW QUESTION 9
          You have a Windows container host named Server1.
          On Server1, you create a container named Container1.
          You need to mount C:\ContainerFiles from Server1 to Container1. What should you run?

          • A. dockerd --storage-opt dm.mountopt=ContainerFiles
          • B. docker run -it -v c:\ContainerFiles Container1
          • C. dockerd --storage-opt dm.datadev=/c/ContainerFiles
          • D. docker run -it -vc:\ContainerFiles:c:\ContainerFiles Container1

          Answer: D

          NEW QUESTION 10
          Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
          Start of Repeated Scenario:
          A company named Contoso, ltd. has several servers that run Windows Server 2016 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
          The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.
          You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
          The CIO of Contoso identifies the following requirements for the company's IT department:
          • Deploy failover cluster to two new virtual machines.
          • Store all application databases by using Encrypted File System (EFS).
          • Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
          • Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
          Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
          • Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
          End of Repeated Scenario.
          You need to modify the Hyper V cluster to meet the load balancing requirement for the virtual machine. Which command should you run?

          • A. Create a firewall rule 10 allow TCP port 443.
          • B. Create a firewall rule to allow TCP port 8531.
          • C. Require- SSI Oil the Client WebService virtual directory.
          • D. Require SSI on the Inventory virtual directory.

          Answer: D

          NEW QUESTION 11
          Note: This question is part of a series of questions that present the same scenario. Each question in
          the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
          After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          You have two servers that run Windows Server 2016.
          You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed.
          You pull the Microsoft/iis Docker image to Server1.
          You need to view the available space in the Microsoft/iis Docker image. Solution: You run the following commands.
          docker run –name container1 –isolation hyperv –d Microsoft/iis docker exec –i container1 cmd.exe dir
          Does this meet the goal?

          • A. Yes
          • B. No

          Answer: B

          NEW QUESTION 12
          You have a server named Server1 that runs Windows Server 2016 You install the Docker daemon on
          Server1 You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

          • A. Run theNew-NetFirewallRulecmdlet
          • B. Run theSet-ServiceWindows PowerShell cmdlet.
          • C. Run the sc config command.
          • D. Run the sc control command.

          Answer: C

          NEW QUESTION 13
          In this section, you'll see one or more sets of questions with the same scenario and problem Each
          question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
          Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
          Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
          Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
          On Server1, you have the following zone configuration
          70-740 dumps exhibit
          You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
          must resolve queries from all other DNS clients
          Solution From Windows Firewall with Advanced Security on Server1, you create an inbound rule Does this meet the goal?

          • A. Yes
          • B. No

          Answer: A

          NEW QUESTION 14
          DRAG DROP
          On a new server, you install Windows Server 2016, and then you install the Hyper-V server role.
          You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.
          Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
          70-740 dumps exhibit

            Answer:

            Explanation:
            References: https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/deploy-containers-on-server

            NEW QUESTION 15
            DRAG DROP
            You have a server named Server1 that runs Windows Server 2016.
            You plan to deploy Internet Information Services (US) in a Windows container. You need to prepare Server1 for the planned deployment.
            Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in
            the correct order
            70-740 dumps exhibit

              Answer:

              Explanation: 70-740 dumps exhibit

              NEW QUESTION 16
              Note: This question is part of a series of questions that present the same scenario. Each question in
              the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
              After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
              You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
              You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table.
              70-740 dumps exhibit
              You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.
              Solution: On Host1 and Host2, you create a private switch named Priv1, and then you connect VM1 to Priv1.
              Does meet the goal?

              • A. Yes
              • B. No

              Answer: B

              NEW QUESTION 17
              Your network contains an Active Directory domain. The domain contains a new file server named
              Server1 that runs a Server Core installation of Windows Server 2016.
              Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
              You install the Data Deduplication role service on Server1.
              You need to implement Data Deduplication for volumes on D: and E:.
              Solution: From Windows PowerShell, you run Format-Volume E: -FileSystem ReFS and Enable- DeDupVolume -Volume D:,E:.
              Does this meet the goal?

              • A. Yes
              • B. No

              Answer: A

              Explanation:
              References: https://docs.microsoft.com/en-us/windows-server/storage/data- deduplication/understand

              NEW QUESTION 18
              Note: This question is part of a series of questions that present the same scenario. Each question in
              the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
              After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
              You are a server administrator at a company named Contoso, Ltd.
              Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
              70-740 dumps exhibit
              All of the virtual switches are of the external type.
              You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
              Solution: You implement live migration by using Host2 and Host4. Does this meet the goal?

              • A. Yes
              • B. No

              Answer: A

              NEW QUESTION 19
              HOTSPOT
              You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
              Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
              The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
              Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)
              70-740 dumps exhibit
              The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)
              70-740 dumps exhibit
              For each of the following statements, select Yes if the statement is true. Otherwise, select No.
              70-740 dumps exhibit

                Answer:

                Explanation:
                https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

                NEW QUESTION 20
                The Host Guardian Service supports two different deployments of a Guarded fabric (attestation modes). The statement below describes which mode?
                Guarded hosts that can run Shielded VMs are approved based on their identity, measured boot sequence and code integrity policies so that you can ensure that these hosts are only running approved code.

                • A. Admin-trusted attestation
                • B. TPM-trusted attestation

                Answer: B

                Explanation: TPM-trusted attestation offers the strongest possible protections but also requires more configuration steps. Host hardware and firmware must include TPM 2.0 and UEFI 2.3.1 with secure boot enabled.
                TPM trusted attestation is the mode Microsoft recommend that you use because it offers stronger assurances but it requires that your Hyper-V hosts have TPM 2.0.

                100% Valid and Newest Version 70-740 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/70-740/ (New 296 Q&As)