Microsoft 70-741 Exam Dumps 2019

70-741 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/70-741/

Your success in 70-741 exam is our sole target and we develop all our 70-741 dumps in a way that facilitates the attainment of this target. Not only is our 70-741 dumps material the best you can find, it is also the most detailed and the most updated. 70-741 dumps for Microsoft 70-741 are written to the highest standards of technical accuracy.

Online 70-741 free questions and answers of New Version:

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.
70-741 dumps exhibit
Server2 has the following IP configuration.
70-741 dumps exhibit
Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server1, you modify the EndRange IP address of the scope. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 2
You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016.
You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses.
You discover that unauthorized computers can receive an IP address from Server1.
You need to ensure that only authorized computers can receive an IP address from Server1. Solution: You run the following command.
Set-DhcpServerv4FilterList -ComputerName Server1 -Allow False -Deny True Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/dhcpserver/add-dhcpserverv4filter?view=win10-ps

NEW QUESTION 3
You have an IP Address Management (IPAM) server named Server1 that runs Windows Server 2016. You have five DHCP servers. Server1 manages all of the DHCP servers.
On Server1, an administrator uses Purge Event Catalog Data to remove all of the events from the last 30 days. You need to view all of the lease requests that were denied during the last two days.
What should you do?

  • A. On each DHCP server, run the \Microsoft\Windows\Server Manager\CleanUpOldPerfLogs scheduled task, and then review the event catalog on Server1.
  • B. On Server1, run the Purge Event Catalog Data action and then open Event Viewer on Server1.
  • C. Review the log data in C:\Windows\System32\ipam\Database on Server1.
  • D. On each DHCP server, review the DHCP Server operational event log.

Answer: C

NEW QUESTION 4
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two network adaptors named NK1 and NIC2. Server2 has two virtual switches named vSwitch1 and vSwitch2. N1C1 connects to vSwitch1. NIC2 connects to vSwitch2
Server1 hosts a virtual machine named VM1. VM1 has two network adapters named vmNIC1 and vmNIC1. VmNIC1 connects to vSwitch1. VmNIC2 connects to vSwitch2.
You need to create a NIC team on VM1.
What should you run on VM1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
70-741 dumps exhibit

    Answer:

    Explanation: Name NICTEAM1 TeamMembers vmNIC1, vmNIC2 –TeamingMode $var1 –LoadBalancingAlgorithm $var2

    NEW QUESTION 5
    You have a server named Server1 that runs Windows Server 2016.
    You need to deploy the first cluster node of a Network Controller cluster.
    Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
    70-741 dumps exhibit

      Answer:

      Explanation: Deploy Network Controller using Windows PowerShell Step 1: Install-WindowsFeature
      Install the Network Controller server role
      To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER.
      Install-WindowsFeature -Name NetworkController –IncludeManagementTools Step 2: New-NetworkControllerNodeObject
      You can create a Network Controller cluster by creating a node object andthen configuring the cluster.
      You need to create a node object for each computer or VM that is a member of the Network Controller cluster.
      Tocreate a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
      New-NetworkControllerNodeObject –Name <string> -Server<String> -FaultDomain <string>-RestInte Step 3: Install-NetworkControllerCluster
      To configure the cluster, typethe following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
      Install-NetworkControllerCluster –Node <NetworkControllerNode[]>–ClusterAuthentication … Step 4: Install-NetworkController
      To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
      Install-NetworkController –Node <NetworkControllerNode[]> –ClientAuthentication References: https://technet.microsoft.com/en-us/library/mt282165.aspx

      NEW QUESTION 6
      You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.
      You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
      You need to provide Internet connectivity for the client computers. What should you do?

      • A. On Server2, select the Internet and Internal network adapters and bridge the connection
      • B. From the DHCP console on Server1, authorize Server2.
      • C. On Server1, stop the DHCP serve
      • D. On the Internal network adapter on Server 2, enable Internet Connection Sharing (ICS).
      • E. On Server2 run the New-NetNat –Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdle
      • F. Configure Server1 to provide the 003 Router option of 131.107.0.10.
      • G. Install the Routing role service on Server2 and configure the NAT routing protoco
      • H. Configure Server1 to provide the 003 Router option of 192.168.1.250.

      Answer: C

      NEW QUESTION 7
      Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 that runs Windows Server 2016.
      Server2 has 10 IPv4 scopes.
      You need to ensure that the scopes are backed up every 30 minutes to the folder D:\DHCPBackup. What should you run?

      • A. dism.exe
      • B. dns.exe
      • C. dnscmd.exe
      • D. netsh.exe
      • E. Set-DhcpServerDatabase
      • F. Set-DhcpServerv4DnsSetting
      • G. Set-DhcpServerv6DnsSetting
      • H. Set-DNSServerSetting

      Answer: E

      NEW QUESTION 8
      You have a server named Server1 that runs Windows Server 2016. You install the DHCP Server server role on Server1.
      You need to authorize DHCP on Server1. What should you run?

      • A. dism.exe
      • B. dns.exe
      • C. dnscmd.exe
      • D. netsh.exe
      • E. Set-DhcpServerDatabase
      • F. Set-DhcpServerv4DnsSetting
      • G. Set-DhcpServerv6DnsSetting
      • H. Set-DNSServerSetting

      Answer: D

      NEW QUESTION 9
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
      Refer to exhibit:
      70-741 dumps exhibit
      Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private1. VM2 has two network adapters.
      You need to ensure that VM1 connects to the corporate network by using NAT.
      Solution: You connect VM1 to Inernal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use Server1 as the default gateway.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: A

      NEW QUESTION 10
      You are implementing IPv6 addressing for your company by using the following specifications:
      70-741 dumps exhibit The global address space is 2001:db8:1234.
      70-741 dumps exhibit The company has 100 locations worldwide.
      70-741 dumps exhibit Each location has up to 300 subnets.
      70-741 dumps exhibit 64 bits will be used for hosts.
      You need to identify how many bits to use for the locations and the subnets.
      How many bits should you identify? To answer, drag the appropriate amounts to the correct targets. Each amount may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
      NOTE: Each correct selection is worth one point.
      70-741 dumps exhibit

        Answer:

        Explanation: 70-741 dumps exhibit

        NEW QUESTION 11
        Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \\contoso.com\namespace1.
        The domain contains a file server named Server1 that runs Windows Server 2016. You create a folder named Folder1 on Server1.
        You need to use Folder1 as a target for Namespace1.
        Which two cmdlets should you use? Each correct answer presents part of the solution.
        NOTE: Each correct selection is worth one point.

        • A. New-DfsnFolderTarget
        • B. Install-WindowsFeature
        • C. Grant-DfsnAccess
        • D. New-DfsnFolder
        • E. New-SmbShare

        Answer: AC

        Explanation: References:
        https://docs.microsoft.com/en-us/powershell/module/dfsn/new-dfsnfoldertarget?view=win10-ps https://docs.microsoft.com/en-us/powershell/module/dfsn/grant-dfsnaccess?view=win10-ps

        NEW QUESTION 12
        You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016.
        You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses.
        You discover that unauthorized computers can obtain an IP address from Server1.
        You need to ensure that only authorized computers can receive an IP address from Server1. Solution: You run the following command.
        Add-DHCPServer4Filter -ComputerName Server1 -MacAddress -List Deny
        Does this meet the goal?

        • A. Yes
        • B. No

        Answer: B

        Explanation: References:
        https://docs.microsoft.com/en-us/powershell/module/dhcpserver/add-dhcpserverv4filter?view=win10-ps

        NEW QUESTION 13
        Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
        Refer to exhibit:
        70-741 dumps exhibit
        Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private1. VM2 has two network adapters.
        You need to ensure that VM1 connects to the corporate network by using NAT.
        Solution: You connect VM2 to Private1 and External1. You install the Remote Access server on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 and VM2 as the default gateway.
        Does this meet the goal?

        • A. Yes
        • B. No

        Answer: B

        NEW QUESTION 14
        Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
        Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server2 that runs Windows Server 2016.
        The DHCP Server server role is installed on Server2. The DNS server role is installed on a server named Server3.
        The network contains 500 non-Windows devices that are registered in the DNS zone of contoso.com. You configure Server2 to lease IP addresses to the non-Windows devices.
        You need to prevent Server2 from overwriting the host (A) records for the non-Windows devices. What should you run?

        • A. dns.exe
        • B. dnscmd.exe
        • C. netsh.exe
        • D. Set-DhcpServerDatabase
        • E. Set-DhcpServerv4DnsSetting
        • F. Set-DhcpServerv6DnsSetting
        • G. Set-DNSServerSetting

        Answer: C

        Explanation: References:
        https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/dnscmd

        NEW QUESTION 15
        Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
        After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
        You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
        You need to ensure that domain users can establish VPN connections only between Monday and Friday. Solution: From Active Directory Users and Computers, you modify the Dial-in Properties of the user accounts. Does this meet the goal?

        • A. Yes
        • B. No

        Answer: B

        NEW QUESTION 16
        You have a server named Server1 that runs Windows Server 2016.
        You need to deploy the first node cluster of a Network Controller cluster.
        Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to answer area and arrange them in the correct order.
        70-741 dumps exhibit

          Answer:

          Explanation: 70-741 dumps exhibit

          NEW QUESTION 17
          Scenario:
          You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
          70-741 dumps exhibit
          You install the Remote Access server role on Server2. Server2 has the following configured.
          *Network address translation (NAT)
          *The DHCP Server server role
          The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
          * Add 28 devices to subnet2 for a temporary project.
          * Configure Server2 to accept VPN connections from the internet.
          * Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
          End of Scenario:
          You add a computer to subnet1. The computer has an IP address of 10.10.0.129
          Web1 receives a request from the new computer and sends a response. What should you do?

          • A. 10.10.0.129
          • B. 10.10.0.224
          • C. 131.107.0.223
          • D. 172.16.128.222

          Answer: C

          Recommend!! Get the Full 70-741 dumps in VCE and PDF From Surepassexam, Welcome to Download: https://www.surepassexam.com/70-741-exam-dumps.html (New 235 Q&As Version)