Best Quality 70-741 Study Guides 2019

70-741 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/70-741/

We provide 70-741 exam which are the best for clearing 70-741 test, and to get certified by Microsoft Networking with Windows Server 2016. The 70-741 dumps covers all the knowledge points of the real 70-741 exam. Crack your Microsoft 70-741 Exam with latest dumps, guaranteed!

Free demo questions for Microsoft 70-741 Exam Dumps Below:

NEW QUESTION 1
Refer to Exhibit:
70-741 dumps exhibit
\\Server1.adatum.com\namespace1 has a folder target maned Folder1. A user named User1 has Full Control share and NTFS permissions to Folder1.
Folder1 contains a file named File1.doc. User1 has only Write NTFS permissions to File1.doc.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
70-741 dumps exhibit

    Answer:

    Explanation: 70-741 dumps exhibit

    NEW QUESTION 2
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
    You need to ensure that domain users can establish VPN connections only between Monday and Friday. Solution: From Network Policy Server, you modify the Network Policies on Server1.
    Does this meet the goal?

    • A. Yes
    • B. No

    Answer: A

    NEW QUESTION 3
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
    Server1 has the following IP configuration.
    70-741 dumps exhibit
    Server2 has the following IP configuration.
    70-741 dumps exhibit
    Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
    Solution: On Server1, you modify the ActivatePolicies setting of the scope. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    NEW QUESTION 4
    Scenario:
    You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
    70-741 dumps exhibit
    You install the Remote Access server role on Server2. Server2 has the following configured.
    *Network address translation (NAT)
    *The DHCP Server server role
    The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
    * Add 28 devices to subnet2 for a temporary project.
    * Configure Server2 to accept VPN connections from the internet.
    * Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
    End of Scenario:
    You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2.
    What subnet mask should you identify? To answer, select the appropriate options in the answer area.
    70-741 dumps exhibit

      Answer:

      Explanation: 70-741 dumps exhibit

      NEW QUESTION 5
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
      Refer to exhibit:
      70-741 dumps exhibit
      Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2 has two network adapters.
      You need to ensure that VM1 connects to the corporate network by using NAT.
      Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: A

      NEW QUESTION 6
      Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1 that has access-based enumeration enabled. Namespace1 has a folder named Folder1. Folder1 has a target of \\Server1\Folder1.
      The permissions for folder1 are configured as shown in the following table.
      70-741 dumps exhibit
      Access-based enumeration is disabled for the share of Folder1.
      You need to ensure that both User1 and User2 can see Folder1 When they access\\Contoso.com\NameSpace1. What should you do?

      • A. Disable access-based enumeration for Namespace1.
      • B. Run the Set-DfsnFolder cmdlet.
      • C. Run the Set-DfsFolderTarget cmdlet.
      • D. Deny User1 the read DFS permission to Folder1.

      Answer: A

      NEW QUESTION 7
      You have a server named Server1 that has a Server Core installation of Windows Server 2016. Server1 is configured to obtain an IP address automatically.
      You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
      What should you run?

      • A. ipconfig.exe
      • B. New-NetiPAddress
      • C. Set-NetAdapter
      • D. Set-NetIPv4Protocol

      Answer: B

      Explanation: References:
      https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps

      NEW QUESTION 8
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.
      Users report that their client computers fail to obtain an IP address.
      You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)
      70-741 dumps exhibit
      Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
      You need to ensure that all of the client computers on the network can obtain an IP address from Server2. Solution: You run the Set-DhcpServerv4Scope cmdlet.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: A

      Explanation: https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

      NEW QUESTION 9
      You plan to deploy several Hyper-V hosts that run Windows Server 2016. The deployment will use Software defined Networking (SDN) and VXLAN.
      Which server role should you install on the network to support the planned deployment?

      • A. Network Controller
      • B. Network Policy and Access Services
      • C. Remote Access
      • D. Host Guardian Service

      Answer: A

      NEW QUESTION 10
      You have a server named Server1 that runs Windows Server 2016.
      Server1 has two network cards. One network card connects to your internal network and the other network card connects to the Internet.
      You plan to use Server1 to provide Internet connectivity for client computers on the internal network. You need to configure Server1 as a network address translation (NAT) server.
      Which server role or role service should you install on Server1 first?

      • A. Network Controller
      • B. Web Application Proxy
      • C. Routing
      • D. DirectAccess and VPN (RAS)

      Answer: C

      NEW QUESTION 11
      Your company has a testing environment that contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016. Server1 has IP Address Management (IPAM) installed. IPAM has the following configuration.
      70-741 dumps exhibit
      The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit. (Click the Exhibit button.)
      70-741 dumps exhibit
      The group policy configurations are shown in the GPO exhibit. (Click the Exhibit button.)
      70-741 dumps exhibit
      For each of the following statements, select Yes if the statement is true. Otherwise, select No.
      70-741 dumps exhibit

        Answer:

        Explanation: 70-741 dumps exhibit

        NEW QUESTION 12
        Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
        Server1 has IP Address Management (IPAM) installed. Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed.
        You need to integrate IPAM and VMM.
        Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers. Each object type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
        70-741 dumps exhibit

          Answer:

          Explanation: References:
          https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

          NEW QUESTION 13
          You have a test environment that includes two servers named Server1 and Server2. The severs run Windows Server 2016. You need to ensure that you can implement SMB Direct between the servers. Which feature should the servers support?

          • A. (RDMA)
          • B. Multipath I/O (MPIO)
          • C. virtual machine queue (VMQ)
          • D. single root I/O virtualization (SR-IOV)

          Answer: A

          Explanation: https://technet.microsoft.com/en-us/library/jj134210%28v=ws.11%29.aspx?f=255&MSPPError=-2147217396

          NEW QUESTION 14
          You have a server that is configured as a hosted BranchCache server.
          You discover that a Service Connection Point (SCP) is missing for the BranchCache server. What should you run to register the SCP?

          • A. setspn.exe
          • B. Reset-BC
          • C. ntdsutil.exe
          • D. Enable-BCHostedServer

          Answer: D

          Explanation: https://technet.microsoft.com/en-us/library/jj862376(v=ws.11).aspx

          NEW QUESTION 15
          Your company has five departments, including a web research department.
          You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2.
          Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution.
          You need to ensure that users in the web research department use DNS2 for name resolution.

          • A. From the properties of Scope1, modify the Conflict detection attempts setting.
          • B. From the properties of Scope1, configure Name Protection.
          • C. From the properties of IPv4, configure the bindings.
          • D. From IPv4, create a new filter.
          • E. From the properties of Scope1, create an exclusion range.
          • F. From IPv4, run the DHCP Policy Configuration Wizard.
          • G. From Control Panel, modify the properties of Ethernet
          • H. From Scope1 create a reservation.

          Answer: A

          NEW QUESTION 16
          Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
          After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          Your network contains an Active Directory domain named contoso.com
          You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2016 source files are located in drive D.
          Solution: You run the following cmdlet.
          New-NanoServerImage -Edition Datacenter -DeploymentType Host -Compute
          -Media ‘D:\’ -TargetPath c:\Nano1\Nano1.wim -ComputerName Nano1 -DomainName Contoso.com
          Does this meet the goal?

          • A. Yes
          • B. NO

          Answer: A

          NEW QUESTION 17
          You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2016.
          You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2.
          You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

          • A. From the Connection Manager Administration Kit, create a Connection Manager profile.
          • B. From Routing and Remote Access, configure the authentication provider.
          • C. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.
          • D. From Server Manager, create an Access Policy.

          Answer: D

          Explanation: http://www.nyazit.com/configure-network-policy-server-2016/

          100% Valid and Newest Version 70-741 Questions & Answers shared by Certleader, Get Full Dumps HERE: https://www.certleader.com/70-741-dumps.html (New 235 Q&As)