Precise 70-741 Exam Questions 2019

70-741 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/70-741/

70-741 dumps for Microsoft certification, Real Success Guaranteed with Updated 70-741 dumps. 100% PASS 70-741 Networking with Windows Server 2016 exam Today!

Online 70-741 free questions and answers of New Version:

NEW QUESTION 1
Your network contains an Active Directory domain named contoso.com. The Functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows server 2016 standard. The domain contains 100 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
70-741 dumps exhibit
70-741 dumps exhibit

    Answer:

    Explanation: 70-741 dumps exhibit

    NEW QUESTION 2
    Your company has 5,000 users who work remotely.
    You have 40 VPN servers that host the remote connections for the users. You plan to deploy a RADIUS solution that contains five RADIUS servers.
    You need to ensure that client authentication requests are distributed evenly between the five RADIUS servers.
    What should you do?

    • A. Install the Network Load Balancing role service on all of the RADIUS serve
    • B. Configure all of the RADIUS clients to connect to a virtual IP address.
    • C. Deploy RAS Gateway to a new serve
    • D. Configure all of the RADIUS clients to connect to RAS Gateway.
    • E. Install the Failover Clustering role service on all of the RADIUS server
    • F. Configure all of the RADIUS clients to connect to the IP address of the cluster.
    • G. Deploy a RADIUS proxy to a new serve
    • H. Configure all of the RADIUS clients to connect to the RADIUS proxy.

    Answer: D

    Explanation: https://technet.microsoft.com/en-us/library/dd197433(v=ws.10).aspx

    NEW QUESTION 3
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
    Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
    You open the DHCP console as shown in the exhibit.
    70-741 dumps exhibit
    You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
    Solution: You authorize the server. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    NEW QUESTION 4
    You are deploying Software Defined Networking (SDN) by using Windows Server 2016.
    You plan to deploy a three-node Network Controller cluster. You plan to use virtual machines for the network controller and the management client. The virtual machines will NOT be domain-joined.
    You need to configure authentication for the cluster. Which command should you run?

    • A. Install-NetworkController –Node @{Node1, Node2, Node3} –ClientAuthentication X509
    • B. Install-NetworkControllerCluster –Node @{Node1, Node1, Node3} –ClientAuthentication Kerberos
    • C. Install-NetworkControllerCluster –Node @{Node1, Node1, Node3} –ClientAuthentication X509
    • D. Install-NetworkControllerCluster –Node @{Node1, Node1, Node3} –ClientAuthentication None
    • E. Install-NetworkController –Node @{Node1, Node2, Node3} –ClientAuthentication Kerberos

    Answer: C

    Explanation: References: https://docs.microsoft.com/en-us/windows-server/networking/sdn/security/nc-security

    NEW QUESTION 5
    You have an IP Address Management (IPAM) server named IPAM1 that runs Window Server 2016. IPAM1 manages all of the DHCP servers on your network.
    You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
    You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
    Solution: From Server Manager, you run Retrieve Event Catalog Data. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: A

    Explanation: References:
    http://www.techblogopedia.com/blog/ip-address-managementipam-windows-server-2012-r2-part-3/

    NEW QUESTION 6
    You have 2000 devices, One hundred of the devices are mobile devices that have physical addresses beginning with 98-5F.
    You have a DHCP server named Server1.
    You need to ensure that the mobile devices register their host name by using a DNS suffix of mobile.contoso.com

    • A. From the properties of Scopte1, Modify the Conflict detection attempts setting.
    • B. From the properties of Scope1, Configure Name Protection.
    • C. From the Properties of IPV4, configure the bindings.
    • D. From IPV4, create a new filter.
    • E. From the properties of Scope1, create an exclusion range.
    • F. From IPv4, run the DHCP Policy Configuration Wizard.
    • G. From Control Panel, modify the properties of Ethernet.
    • H. From Scope1, create a reservation

    Answer: F

    NEW QUESTION 7
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.
    Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
    You need to ensure that domain users can establish VPN connections only between Monday and Friday.
    Solution: From Routing and Remote Access, You configure the Properties of Server1. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    NEW QUESTION 8
    You have an internal network that contains multiple subnets.
    You have a Microsoft Azure subscription that contains multiple virtual networks.
    You need to deploy a hybrid routing solution between the network and the Azure subscription. The solution must ensure that the computers on all of the networks can connect to each other.
    You install RAS Gateway and enable BGP routing on the network and in Azure.
    Which three actions should you perform next in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
    70-741 dumps exhibit

      Answer:

      Explanation: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-bgp-resource-manager-ps#enablebgp

      NEW QUESTION 9
      You have a server named Server1 that runs Windows Server 2016.
      Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network.
      You need to enable a user named TECH1 to create pointer (PTR), host (A) and service location (SRV) records on all of the DNS servers on the network.
      What should you do on Server1?

      • A. From the IPAM node in Server Manager, assign the IPAM DNS Administrator Role to TECH1 and create a new access scope.
      • B. Run the Set-IpamRange cmdlet, and then run the Set-IpamAccessScope cmdlet.
      • C. From the IPAM node in Server Manager, create a new user role and a new access policy.
      • D. Run the Set-IpanCustomFiels cmdelt, and then run the Set-IpamAddressSpace cmdlet.

      Answer: A

      Explanation: References:
      https://docs.microsoft.com/en-us/windows-server/networking/technologies/ipam/view-roles-and-role-permission

      NEW QUESTION 10
      You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016. You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies.
      Which component must you install for the planned deployment?

      • A. the Data Center Bridging feature
      • B. the Network Controller server role
      • C. the Routing role service
      • D. the Canary Network Diagnostics feature

      Answer: B

      Explanation: https://technet.microsoft.com/en-us/library/mt403307(v=ws.11).aspx#bkmk_slb

      NEW QUESTION 11
      Your network contains an Active Directory domain named contoso.com that contains a domain controller named DC1. All DNS servers for the network run BIND 10.
      Your perimeter network contains a DHCP server named DHCP1 that runs Windows Server 2016. DHCP1 is a member of a workgroup named WORKGROUP. DHCP1 provides IP address leases to guests accessing the Wi-Fi network.
      Several engineers access the network remotely by using a VPN connection to a remote access server that runs Windows Server 2016. All of the VPN connections use certificate-based authentication and are subject to access policies in Network Policy Server (NPS). Certificates are issued by an enterprise certification authority (CA) named CA1.
      All Windows computers on the network are activated by using Key Management Service (KMS). On-premises users use Remote Desktop Services (RDS).
      You plan to deploy IP Address Management (IPAM) to the network. Which action can you perform on the network by using IPAM?

      • A. Manage the DNS zones on the DNS servers.
      • B. Audit logon events on the RDS server.
      • C. Audit authentication events from DC1.
      • D. Manage activations on the KMS server.

      Answer: C

      NEW QUESTION 12
      You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
      Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
      You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
      70-741 dumps exhibit
      70-741 dumps exhibit
      You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
      What should you do?

      • A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
      • B. From Windows PowerShell on Server1, run Set-VmNetworkAdapter cmdlet.
      • C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
      • D. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

      Answer: B

      Explanation: References: https://www.techsupportpk.com/2017/01/nic-teaming-in-hyper-v-on-windows-server-2016.html

      NEW QUESTION 13
      You need to implement network virtualization.
      On which object should you configure the virtual subnet ID?

      • A. Virtual switch
      • B. Hyper-V server
      • C. VM
      • D. Virtual network adapter

      Answer: D

      NEW QUESTION 14
      Your network contains an Active Directory forest named contoso.com. The forest contains a Network Policy Server (NPS) server named Radius1 that runs Windows Server 2016.
      You need to create a new connection request policy that will allow only Secure Socket Tunneling Protocol (SSTP) connections. Radius1 will manage all authentication requests.
      Which NAS port type and which authentication method should you configure in the connection request policy? To answer, select the appropriate options in the answer area.
      NOTE: Each correct selection is worth one point.
      70-741 dumps exhibit

        Answer:

        Explanation: 70-741 dumps exhibit

        NEW QUESTION 15
        Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
        Refer to exhibit:
        70-741 dumps exhibit
        Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2 has two network adapters.
        You need to ensure that VM1 connects to the corporate network by using NAT.
        Solution: You connect VM2 to private1 and External1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on VM2. You configure VM1 to use VM2 as the default gateway.
        Does this meet the goal?

        • A. Yes
        • B. No

        Answer: B

        NEW QUESTION 16
        You have a Hyper-V host named Host1 that runs Windows Server 2016 Datacenter. Host1 has eight network adapters that support Remote Direct Memory Access (RDMA).
        You plan to configure Host1 as part of a four-node Hyper-V converged solution. You enable the Data Center Bridging (DCB) feature.
        You need to enable Switch Embedded Teaming (SET) and RDMA.
        Which three cmdlets should you run in sequence? To answer move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
        70-741 dumps exhibit

          Answer:

          Explanation: 70-741 dumps exhibit

          NEW QUESTION 17
          You have a server named Server1 that runs Windows Server 2016. Server1 is in a workgroup and has the DNS Server role installed. You need to enable DNS analytical diagnostic logging on Server1. What should you do?

          • A. From Local Group Policy Editor, configure Audit Policy.
          • B. From DNS Manager, configure Monitoring.
          • C. From Windows PowerShell, run the Enable-DnsServerPolicy cmdlet.
          • D. From DNS Manager, configure Event Logging.
          • E. From Event Viewer, configure DNS-Server Applications and Services Logs.

          Answer: E

          Explanation: References:
          https://www.yourdigitalmind.com/tutorials/how-to-enable-dns-logging-and-diagnostics-in-windows-server-2012

          P.S. Easily pass 70-741 Exam with 235 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam 70-741 Dumps: https://www.surepassexam.com/70-741-exam-dumps.html (235 New Questions)