Microsoft 70-741 Exam Questions and Answers 2019

70-741 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/70-741/

70-741 exam for Microsoft certification, Real Success Guaranteed with Updated 70-741 dumps. 100% PASS 70-741 Networking with Windows Server 2016 exam Today!

Online Microsoft 70-741 free dumps demo Below:

NEW QUESTION 1
You have two Hyper-V hosts named Server1 and Server2 that run windows server 2012 R2. The servers are nodes in a failover cluster named Cluster1.
You perform a rolling upgrade of the cluster nodes to Windows Server 2016.
You need to ensure that you can implement the Virtual Machine Load Balancing feature. Which cmdlet should you use?

  • A. Update-ClusterFunctionalLevel
  • B. SetCauClusterRole
  • C. Update-ClusterNetWorkNameResource
  • D. Set-ClusterGroupSet

Answer: A

NEW QUESTION 2
You have a DNS server named Server1 that runs Windows Server 2016. Server1 has two Active Directory-integrated zones named contoso.com and adatum.com.
All client computers run Windows 10.
Server1 recently experienced millions of erroneous DNS queries causing a denial of service.
You need to reduce the likelihood that a similar attack will cause a denial of service. The solution must ensure that Server1 continues to resolve names for clients.
What should you do?

  • A. Sign both adatum.com and contoso.com zones.
  • B. Implement DNS-based Authentication of named Entities (DANS).
  • C. Configure DNS policies on Server1.
  • D. Enable Response Rate Limiting (RRL) on Server1.

Answer: D

NEW QUESTION 3
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
70-741 dumps exhibit
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
70-741 dumps exhibit
You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days.
Which two actions should you perform? Each correct answer presents part of the solution.

  • A. Create a scheduled task that runs the Remove-Computer cmdlet.
  • B. Modify the Zone Aging/Scavenging Properties of the zone.
  • C. Modify the Time to live (TTL) value of the start of authority (SOA) record.
  • D. Set the Scavenging period of Server1.
  • E. Modify the Expires after value of the start of authority (SOA) record.

Answer: BD

Explanation: https://technet.microsoft.com/en-us/library/cc771362(v=ws.10).aspx

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a network administrator for a company named Contoso, Ltd. The network is configured as shown in the exhibit.
70-741 dumps exhibit
You install the Remote Access server role on Server2. Server2 has the following configured:
70-741 dumps exhibit Network address translation (NAT)
70-741 dumps exhibit The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to Server2. You identify the following requirements:
70-741 dumps exhibit Add 28 devices to subnet2 for a temporary project.
70-741 dumps exhibit Configure Server2 to accept VPN connections from the internet.
70-741 dumps exhibit Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. Which VPN protocol should you configure on Server2?

  • A. L2TP
  • B. IKEv2
  • C. PPTP
  • D. SSTP

Answer: C

NEW QUESTION 5
Your network contains an Active Directory forest. The forest contains a domain named contoso.com.
All of the DHCP servers and the DNS servers in the forest are managed by using an IP Address Management (IPAM) server named Cont-IPAM1.
You acquire a new company that has an Active Directory forest. The forest contains a domain named fabrikam.com.
You have six servers that are configured as shown in the following table.
70-741 dumps exhibit
You need to ensure that all of the DHCP and DNS servers in both of the forests can be managed by using Cont_IPAM1. The solution must use the principle of least privileges.
Which two actions should you perform? Each correct answer presents part of the solution.

  • A. Upgrade Fabr_DNS1 to Windows Server 2016.
  • B. Upgrade Fabr_DHCP1 to Windows Server 2016.
  • C. Create an outgoing forest trust from contoso.com to fabrikam.com.
  • D. Upgrade Cont_IPAM1 to Windows Server 2016.
  • E. Create a two-way forest trust between contoso.com and fabrikam.com

Answer: DE

Explanation: References:
https://github.com/MicrosoftDocs/windowsserverdocs/blob/master/WindowsServerDocs/networking/technologi
Tomsho, Greg, MCSA Guide to Networking with Windwos Server 2016, Exam 70-741, Cengage Learning, Boston, 2018, p. 223

NEW QUESTION 6
You have a Scale-Out File Server that has a share named Share1. Share1 contains a virtual disk file named Disk1.vhd.
You plan to create a guest failover cluster.
You need to ensure that you can use the virtual disk as a shared virtual disk for the gust failover cluster. Which cmdlet should you use?

  • A. Optimize VHD
  • B. Optimize VHDSet
  • C. Convert-VHD
  • D. Set-VHD

Answer: C

NEW QUESTION 7
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.
You create a domain user named User1.
You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.
What should you do on each server? To answer, select the appropriate options in the answer area.
70-741 dumps exhibit

    Answer:

    Explanation: On Server1: Create a Run As Account that uses User1.
    On Server2: Add User1 to IPAM ASM Administrator Role. https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx

    NEW QUESTION 8
    You are configuring the network for a small branch office. Currently, the branch office does not connect directly to the Internet.
    In the branch office, you deploy a new server named Server1 that has a server Core installation of Windows Server 2016. Server1 has two network adapters configured as shown in the following table.
    70-741 dumps exhibit
    You plan to use Server1 to provide Internet connectivity for the branch office.
    Routing and Remote Access (RRAS) in installed and configured for VPN remote access on Server1. You need to configure RRAS on Server1 to provide network address translation (NAT).
    Which command or cmdlet should you use first?

    • A. New-NetNat Nat1 -ExternalIPInterfaceaddressPrefix 131.107.10.1/29
    • B. netsh.exe routing ip nat install
    • C. route.exe add 192.168.1.1 255.255.255.0 131.107.10.1 metric 1
    • D. Enable-NetNatTransitionConfiguration

    Answer: B

    Explanation: References:
    https://social.technet.microsoft.com/Forums/exchange/en-US/5cd50748-af62-4d29-ab92-1a010b9a1a9f/how-to-

    NEW QUESTION 9
    You have a server named Host1 that runs Windows Server 2016.
    You configure Host1 as a virtualization host and create 20 new virtual machines on Host1. You need to ensure that all of the virtual machines can connect to the Internet through Host1.
    Which three actions should you perform? Each correct answer presents part of the solution.

    • A. On a virtual machine, install the Remote Access server role.
    • B. From the properties of each virtual machine, enable virtual LAN identification.
    • C. From the properties of each virtual machine, connect to the virtual machine switch.
    • D. On Host1, configure the network address translation (NAT) network.
    • E. On Host1, create an internal virtual machine switch and specify an IP address for the switch.

    Answer: CDE

    Explanation: https://technet.microsoft.com/en-us/library/ee449441(v=ws.10).aspx

    NEW QUESTION 10
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
    The settings for VM1 are configured as shown in the exhibit below.
    70-741 dumps exhibit
    You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
    Solution: You need to enable the Guest Service integration service for VM1. Does this meet the goal?

    • A. YES
    • B. NO

    Answer: A

    NEW QUESTION 11
    Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host. You are deploying Software Defined Network (SDN) by using Windows Server 2016.
    You deploy a virtual machine that runs Windows Server 2016, and you install the Network Controller server role.
    You need to configure the virtual machine as the network controller. What should you do?

    • A. Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to X509.
    • B. Run the Install-NetworkController cmdlet and set ClientAuthentication to None.
    • C. Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to None.
    • D. Run the Install-NetworkController cmdlet and set ClientAuthentication to Kerberos.

    Answer: D

    Explanation: References: https://github.com/MicrosoftDocs/windowsserverdocs/blob/master/WindowsServerDocs/networking/sdn/deploy

    NEW QUESTION 12
    Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2016.
    You have a DHCP scope for the 10.0.0.0/24 IP subnet. One hundred and fifty clients reside in the subnet. Fifty of the DHCP clients are NOT domain-joined.
    You need to ensure that DHCP clients without a configured DNS suffix register automatically in a DNS zone named workgroup.contoso.com. The other DHCP clients must register in the DNS zone of their respective domain.
    What should you do?

    • A. Configure the DNS properties of the 10.0.0.0/24 DHCP scope.
    • B. Create a DHCP policy that has a condition based on the fully qualified domain name (FQDN) criterion.Configure the IP address range properties of the policy.
    • C. Create a DHCP policy that has a condition based on the fully qualified domain name (FQDN) criterion.Configure the DNS properties of the policy.
    • D. Configure the 015 DNS Domain Name scope option in the 10.0.0.0/24 DHCP scope.

    Answer: C

    NEW QUESTION 13
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network.
    You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
    You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
    Solution: From Task Scheduler, you run the Microsoft\Windows\IPAM\Audit task. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    NEW QUESTION 14
    You have a network address translation (NAT) server named NAT1 that has an external IP address of 131.107.50.1 and an internal IP address of 10.0.0.1.
    You deploy a new server named Web1 that has an IP address of 10.0.0.211.
    A remote server named app.fabrikam.com has an IP address of 131.107.1.232. You need to make Web1 accessible to app.fabrikam.com through NAT1.
    What command should you run from NAT1? To answer, select the appropriate options in the answer area.
    70-741 dumps exhibit

      Answer:

      Explanation: https://technet.microsoft.com/en-us/itpro/powershell/windows/nat/add-netnatstaticmapping

      NEW QUESTION 15
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
      After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
      The London site contains a web server named Web1 that runs Windows Server 2016.
      You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
      Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 16
      You have two servers named Server1 and Server2 that run Windows Server 2016. Both servers have the DHCP Server server role installed.
      Server1 has a DHCP scope named Scope1. Server2 has a DHCP scope named Scope2.
      You need to ensure that client computers can get an IP address if a single DHCP server fails. You must be able to control the percentage of requests to which each DHCP server responds during normal network operations.
      What should you do?

      • A. Add Server1 and Server2 as nodes in a failover cluster, and then configure the DHCP Server server role.
      • B. Add Server1 and Server2 as nodes in a failover cluster, and then configure the quorum mode.
      • C. On Server1 and Server2, configure DHCP failover for Scope1 and Scope2.
      • D. Add Server1 and Server2 as nodes in a failover cluster, and then configure port rules for UDP 67 and UDP 68.

      Answer: C

      NEW QUESTION 17
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      You have a server named Server1 that has the Network Policy and Access Services server role installed. You create a Shared Secret Network Policy Server (NPS) template named Template1.
      You need to view the shared secret string used for Template1.
      Solution: From the Network Policy Server console, you export the configuration, and you view the exported XML file.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: A

      P.S. Easily pass 70-741 Exam with 235 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam 70-741 Dumps: https://www.surepassexam.com/70-741-exam-dumps.html (235 New Questions)