Microsoft AZ-102 Braindumps 2019

AZ-102 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/AZ-102/

We provide AZ-102 Study Guides in two formats. Download PDF & Practice Tests. Pass Microsoft AZ-102 Exam quickly & easily. The AZ-102 PDF type is available for reading and printing. You can print more and practice many times. With the help of our AZ-102 Study Guides product and material, you can easily pass the AZ-102 exam.

Online AZ-102 free questions and answers of New Version:

NEW QUESTION 1
You have an Azure Service Bus.
You need to implement a Service Bus queue that guarantees first in first-out (FIFO) delivery of messages.
What should you do?

  • A. Set the Lock Duration setting to 10 seconds.
  • B. Enable duplicate detection.
  • C. Set the Max Size setting of the queue to 5 GB.
  • D. Enable partitioning.
  • E. Enable session

Answer: E

Explanation: Through the use of messaging sessions you can guarantee ordering of messages, that is first-in-firstout (FIFO) delivery of messages.
References:
https://docs.microsoft.com/en-us/azure/service-bus-messaging/service-bus-azure-and-service-busqueues- compared-contrasted

NEW QUESTION 2
HOT SPOT
You have an Azure subscription named Subscription1. Subscription1 contains two Azure virtual machines named VM1 and VM2. VM1 and VM2 run Windows Server 2016.
VM1 is backed up daily by Azure Backup without using the Azure Backup agent. VM1 is affected by ransomware that encrypts data.
You need to restore the latest backup of VM1.
To which location can you restore the backup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-102 dumps exhibit

    Answer:

    Explanation: Box 1: VM1 only
    To restore files or folders from the recovery point, go to the virtual machine and choose the desired recovery point.
    Box 2: A new Azure virtual machine only
    On the Restore configuration blade, you have two choices: Create virtual machine
    Restore disks References:
    https://docs.microsoft.com/en-us/azure/backup/backup-azure-restore-files-from-vm https://docs.microsoft.com/en-us/azure/backup/backup-azure-arm-restore-vms

    NEW QUESTION 3
    HOT SPOT
    You have a virtual network named VNet1 that has the configuration shown in the following exhibit.
    AZ-102 dumps exhibit
    Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
    NOTE: Each correct selection is worth one point.
    AZ-102 dumps exhibit

      Answer:

      Explanation: Box 1: add a subnet
      Your IaaS virtual machines (VMs) and PaaS role instances in a virtual network automatically receive a private IP address from a range that you specify, based on the subnet they are connected to. We
      need to add the 192.168.1.0/24 subnet. Box 2: add a network interface
      The 10.2.1.0/24 network exists. We need to add a network interface.
      References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-static-privateip- arm-pportal

      NEW QUESTION 4
      SIMULATION
      Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
      AZ-102 dumps exhibit
      AZ-102 dumps exhibit
      AZ-102 dumps exhibit
      AZ-102 dumps exhibit
      AZ-102 dumps exhibit
      AZ-102 dumps exhibit
      When you are finished performing all the tasks, click the ‘Next’ button.
      Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
      Overview
      The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
      Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
      Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
      To start the lab
      You may start the lab by clicking the Next button.
      You need to create a virtual network named VNET1008 that contains three subnets named subnet0, subnet1, and subnet2. The solution must meet the following requirements:
      Connections from any of the subnets to the Internet must be blocked. Connections from the Internet to any of the subnets must be blocked.
      The number of network security groups (NSGs) and NSG rules must be minimized. What should you do from the Azure portal?

        Answer:

        Explanation: Step 1: Click Create a resource in the portal.
        Step 2: Enter Virtual network in the Search the Marketplace box at the top of the New pane that appears. Click Virtual network when it appears in the search results.
        Step 3: Select Classic in the Select a deployment model box in the Virtual Network pane that appears, then click Create.
        Step 4: Enter the following values on the Create virtual network (classic) pane and then click Create: Name: VNET1008
        Address space: 10.0.0.0/16 Subnet name: subnet0 Resource group: Create new
        Subnet address range: 10.0.0.0/24
        Subscription and location: Select your subscription and location.
        Step 5: In the portal, you can create only one subnet when you create a virtual network. Click Subnets (in the SETTINGS section) on the Create virtual network (classic) pane that appears. Click +Add on the VNET1008 - Subnets pane that appears.
        Step 6: Enter subnet1 for Name on the Add subnet pane. Enter 10.0.1.0/24 for Address range. Click OK.
        Step 7: Create the third subnet: Click +Add on the VNET1008 - Subnets pane that appears. Enter subnet2 for Name on the Add subnet pane. Enter 10.0.2.0/24 for Address range. Click OK. References: https://docs.microsoft.com/en-us/azure/virtual-network/create-virtual-network-classic

        Case Study: 4,
        Mix Questions Set A (Implement and manage application services)

        NEW QUESTION 5
        You are the global administrator for an Azure Active Directory (Azure AD) tenant named adatum.com.
        You need to enable two-step verification for Azure users. What should you do?

        • A. Configure a playbook in Azure AD conditional access policy.
        • B. Create an Azure AD conditional access policy.
        • C. Create and configure the Identify Hub.
        • D. Install and configure Azure AD Connec

        Answer: B

        Explanation: References:
        https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-mfasettings

        NEW QUESTION 6
        You are configuring Azure Active Directory (AD) Privileged Identity Management.
        You need to provide a user named Admm1 with read access to a resource group named RG1 for only one month.
        The user role must be assigned immediately. What should you do?

        • A. Assign an active role.
        • B. Assign an eligible role.
        • C. Assign a permanently active role.
        • D. Create a custom role and a conditional access polic

        Answer: B

        Explanation: Azure AD Privileged Identity Management introduces the concept of an eligible admin. Eligible admins should be users that need privileged access now and then, but not all-day, every day. The role is inactive until the user needs access, then they complete an activation process and become an active admin for a predetermined amount of time.
        References:
        https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pimconfigure

        NEW QUESTION 7
        Note: This Questions is part of a series of questions that present the same scenario. Each questions in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution. After you answer a questions in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
        You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named ARM1.json.
        You receive a notification that VM1 will be affected by maintenance. You need to move VM1 to a different host immediately.
        Solution: From the Redeploy blade, you click Redeploy. Does this meet the goal?

        • A. Yes
        • B. No

        Answer: A

        Explanation: When you redeploy a VM, it moves the VM to a new node within the Azure infrastructure and then powers it back on, retaining all your configuration options and associated resources.
        References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-newnode

        NEW QUESTION 8
        Note: This questions is part of a series of questions that present the same scenario. Each questions in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution. After you answer a questions in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
        Your company registers a domain name of contoso.com.
        You create an Azure DNS zone named contoso.com, and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
        You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address.
        You need to resolve the name resolution issue.
        Solution: You create a PTR record for www in the contoso.com zone. Does this meet the goal?

        • A. Yes
        • B. No

        Answer: B

        Explanation: Modify the Name Server (NS) record.
        References: https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns

        NEW QUESTION 9
        You have an azure subscription that contain a virtual named VNet1. VNet1. contains four subnets named Gatesway, perimeter, NVA, and production.
        The NVA contain two network virtual appliance (NVAs) that will network traffic inspection between the perimeter subnet and the production subnet.
        You need o implement an Azure load balancer for the NVAs. The solution must meet the following requirements:
        The NVAs must run in an active-active configuration that uses automatic failover.
        The NVA must load balance traffic to two services on the Production subnet. The services have different IP addresses
        Which three actions should you perform? Each correct answer presents parts of the solution. NOTE: Each correct selection is worth one point.

        • A. Add two load balancing rules that have HA Ports enabled and Floating IP disabled.
        • B. Deploy a standard load balancer.
        • C. Add a frontend IP configuration, two backend pools, and a health prob.
        • D. Add a frontend IP configuration, a backend pool, and a health probe.
        • E. Add two load balancing rules that have HA Ports and Floating IP enabled.
        • F. Deploy a basic load balance

        Answer: BCE

        Explanation: A standard load balancer is required for the HA ports.
        -Two backend pools are needed as there are two services with different IP addresses.
        -Floating IP rule is used where backend ports are reused. Incorrect Answers:
        F: HA Ports are not available for the basic load balancer. References:
        https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-standard-overview https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-multivip-overview

        NEW QUESTION 10
        You recently deployed a web app named homepagelod7509087.
        You need to back up the code used for the web app and to store the code in the homepagelod7509Q87 storage account. The solution must ensure that a new backup is created daily. What should you do from the Azure portal?

          Answer:

          Explanation: Step 1:
          Locate and select the web app homepagelod7509087, select Backups. The Backups page is displayed.
          AZ-102 dumps exhibit
          Step 2:
          In the Backup page, Click Configure. Step 3:
          In the Backup Configuration page, click Storage: Not configured to configure a storage account.
          AZ-102 dumps exhibit
          Step 4:
          Choose your backup destination by selecting a Storage Account and Container. Select the homepagelod7509087 storage account.
          Step 5:
          In the Backup Configuration page that is still left open, select Scheduled backup On, and configure daily backups.
          AZ-102 dumps exhibit
          Step 6:
          In the Backup Configuration page, click Save. Step 7:
          In the Backups page, click Backup.
          References:
          https://docs.microsoft.com/en-us/azure/app-service/web-sites-backup

          NEW QUESTION 11
          You have an Azure subscription named Subscription1.
          You deploy a Linux virtual machine named VM1 to Subscription1. You need to monitor the metrics and the logs of VM1.
          What should you use?

          • A. LAD 3.0
          • B. Azure Analysis Services
          • C. the AzurePerformanceDiagnostics extension
          • D. Azure HDInsight

          Answer: C

          Explanation: You can use extensions to configure diagnostics on your VMs to collect additional metric data.
          The basic host metrics are available, but to see more granular and VM-specific metrics, you need to install the Azure diagnostics extension on the VM. The Azure diagnostics extension allows additional monitoring and diagnostics data to be retrieved from the VM.
          References: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/tutorial-monitoring

          NEW QUESTION 12
          You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated to a different Azure AD tenant.
          Subscription1 contains a virtual network named VNet1.VNet1 contains an Azure virtual machine named VM1 and has an IP address space of 10.0.0.0/16.
          Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine named VM2 and has an IP address space of 10.10.0.0/24.
          You need to connect VNet1 to VNet2. What should you do first?

          • A. Move VNet1 to Subscription2.
          • B. Modify the IP address space of VNet2.
          • C. Provision virtual network gateways.
          • D. Move VM1 to Subscription2.

          Answer: C

          Explanation: The virtual networks can be in the same or different regions, and from the same or different subscriptions. When connecting VNets from different subscriptions, the subscriptions do not need to
          be associated with the same Active Directory tenant.
          Configuring a VNet-to-VNet connection is a good way to easily connect VNets. Connecting a virtual network to another virtual network using the VNet-to-VNet connection type (VNet2VNet) is similar to creating a Site-to-Site IPsec connection to an on-premises location. Both connectivity types use a VPN gateway to provide a secure tunnel using IPsec/IKE, and both function the same way when communicating.
          The local network gateway for each VNet treats the other VNet as a local site. This lets you specify additional address space for the local network gateway in order to route traffic.
          References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnetresource- manager-portal

          NEW QUESTION 13
          You have an Azure DNS zone named adatum.com. You need to delegate a subdomain named research.adatum.com to a different DNS server in Azure. What should you do?

          • A. Create an PTR record named research in the adatum.com zone.
          • B. Create an NS record named research in the adatum.com zone.
          • C. Modify the SOA record of adatum.com.
          • D. Create an A record named “.research in the adatum.com zon

          Answer: D

          Explanation: Configure A records for the domains and sub domains.
          References: http://www.stefanjohansson.org/2012/12/how-to-configure-custom-dns-names-formultiple- subdomain-based-azure-web-sites/

          NEW QUESTION 14
          You have two Azure virtual networks named VNet1 and VNet2. VNet1 contains an Azure virtual
          machine named VM1. VNet2 contains an Azure virtual machine named VM2. VM1 hosts a frontend application that connects to VM2 to retrieve data. Users report that the frontend application is slower than usual.
          You need to view the average round-trip time (RTT) of the packets from VM1 to VM2. Which Azure Network Watcher feature should you use?

          • A. NSG flow logs
          • B. Connection troubleshoot
          • C. IP flow verify
          • D. Connection monitor

          Answer: D

          Explanation: The Connection Monitor feature in Azure Network Watcher is now generally available in all public regions. Connection Monitor provides you RTT values on a per-minute granularity. You can monitor a direct TCP connection from a virtual machine to a virtual machine, FQDN, URI, or IPv4 address. References:
          https://azure.microsoft.com/en-us/updates/general-availability-azure-network-watcher-connectionmonitor- in-all-public-regions/

          NEW QUESTION 15
          From the MFA Server blade, you open the Block/unblock users blade as shown in the exhibit. Block/unblock users
          A blocked user will not receive Multi-Factor Authentication requests. Authentication attempts for that user will be automatically denied. A user will remain blocked for 90 days from the time they are blocked. To manually unblock a user, click the “Unblock” action.
          AZ-102 dumps exhibit
          What caused AlexW to be blocked?

          • A. The user entered an incorrect PIN four times within 10 minutes.
          • B. The user account password expired.
          • C. An administrator manually blocked the user.
          • D. The user reported a fraud alert when prompted for additional authenticatio

          Answer: D

          NEW QUESTION 16
          HOT SPOT
          You have an Azure Active Directory (Azure AD) tenant named adatum.com. Adatum.com contains the groups in the following table.
          AZ-102 dumps exhibit
          You create two user accounts that are configured as shown in the following table.
          AZ-102 dumps exhibit
          To which groups do User1 and User2 belong? To answer. select the appropriate options in the answer area.
          NOTE: Each correct selection is worth one point.
          AZ-102 dumps exhibit

            Answer:

            Explanation: Box 1: Group 1 only First rule applies
            Box 2: Group1 and Group2 only Both membership rules apply.
            References: https://docs.microsoft.com/en-us/sccm/core/clients/manage/collections/createcollections

            P.S. Easily pass AZ-102 Exam with 195 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy AZ-102 Dumps: https://www.2passeasy.com/dumps/AZ-102/ (195 New Questions)