Microsoft AZ-102 Braindumps 2019

AZ-102 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/AZ-102/

It is more faster and easier to pass the AZ-102 Free Practice Questions by using AZ-102 Study Guides. Immediate access to the AZ-102 Exam Questions and find the same core area AZ-102 Exam Questions with professionally verified answers, then PASS your exam with a high score now.

Also have AZ-102 free dumps questions for you:

NEW QUESTION 1
Note: This Questions is part of a series of Questions that present the same scenario. Each questions in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a questions in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named ARM1.json.
You receive a notification that VM1 will be affected by maintenance. You need to move VM1 to a different host immediately.
Solution: From the Overview blade, you move the virtual machine to a different resource group. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation: You should redeploy the VM.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-newnode

NEW QUESTION 2
HOT SPOT
You have an Azure subscription named Subscription1.
You have a virtualization environment that contains the virtualization servers in the following table.
AZ-102 dumps exhibit
The virtual machines are configured as shown in the following table.
AZ-102 dumps exhibit
All the virtual machines use basic disks. VM1 is protected by using BitLocker Drive Encryption (BitLocker).
You plan to use Azure Site Recovery to migrate the virtual machines to Azure.
Which virtual machines can you migrate? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-102 dumps exhibit

    Answer:

    Explanation: Box 1: VM3
    Not VM1 as Bitlocker is not supported. BitLocker must be disabled before you enable replication for a VM.
    Not VM2 as maximum Operating system disk size for a generation VM is 2,048 GB. Box 2: VMA and VMB only
    Not VMC as the max data disk size is 4,095 GB References:
    https://docs.microsoft.com/en-us/azure/site-recovery/hyper-v-azure-support-matrix https://docs.microsoft.com/en-us/azure/site-recovery/vmware-physical-azure-supportmatrix# azure-vm-requirements

    NEW QUESTION 3
    DRAG DROP
    You have an Azure subscription that contains an Azure Service Bus named Bus1.
    Your company plans to deploy two Azure web apps named App1 and App2. The web apps will create messages that have the following requirements:
    Each message created by App1 must be consumed by only a single consumer Each message created by App2 will be consumed by multiple consumers.
    Which resource should you create for each web app? To answer, drag the appropriate resources to the correct web apps. Each resource may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
    NOTE: Each correct selection is worth one point.
    AZ-102 dumps exhibit

      Answer:

      Explanation: AZ-102 dumps exhibit

      NEW QUESTION 4
      You need to define a custom domain name for Azure AD to support the planned infrastructure. Which domain name should you use?

      • A. ad.humongousinsurance.com
      • B. humongousinsurance.onmicrosoft.com
      • C. humongousinsurance.local
      • D. humongousinsurance.com

      Answer: D

      Explanation: Every Azure AD directory comes with an initial domain name in the form of domainname.onmicrosoft.com. The initial domain name cannot be changed or deleted, but you can add your corporate domain name to Azure AD as well. For example, your organization probably has other domain names used to do business and users who sign in using your corporate domain name. Adding custom domain names to Azure AD allows you to assign user names in the directory that are familiar to your users, such as ‘alice@contoso.com.’ instead of 'alice@domain name.onmicrosoft.com'.
      Scenario:
      Network Infrastructure: Each office has a local data center that contains all the servers for that office. Each office has a dedicated connection to the Internet.
      Humongous Insurance has a single-domain Active Directory forest named humongousinsurance.com Planned Azure AD Infrastructure: The on-premises Active Directory domain will be synchronized to Azure AD.
      References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-customdomain

      NEW QUESTION 5
      You have a resource group named RG1. RG1 contains an Azure Storage account named storageaccount1 and a virtual machine named VM1 that runs Windows Server 2016. Storageaccount1 contains the disk files for VM1. You apply a ReadOnly lock to RG1. What can you do from the Azure portal?

      • A. Generate an automation script for RG1.
      • B. View the keys of storageaccount1.
      • C. Upload a blob to storageaccount1.
      • D. Start VM1.

      Answer: B

      Explanation: ReadOnly means authorized users can read a resource, but they can't delete or update the resource. Applying this lock is similar to restricting all authorized users to the permissions granted by the Reader role.
      References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-lockresources

      NEW QUESTION 6
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
      You need to view the date and time when the resources were created in RG1. Solution: From the RG1 blade, you click Automation script.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 7
      You plan to deploy an application getaway named appgw1015 to load balance IP traffic to the Azure virtual machines connected to subnet0.
      You need to configure a virtual network named VNET1015 to support the planned application gateway.
      What should you do from the Azure portal?

        Answer:

        Explanation: Step 1:
        Click Networking, Virtual Network, and select VNET1015. Step 2:
        Click Subnets, and Click +Add on the VNET1015 - Subnets pane that appears. Step 3:
        On the Subnets page, click +Gateway subnet at the top to open the Add subnet page.
        AZ-102 dumps exhibit
        Step 4:
        Locate subnet0 and add it. References:
        https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-site-to-site-resourcemanager- portal

        NEW QUESTION 8
        HOT SPOT
        You have an Azure subscription named Subscrption1 that is associated to an Azure Active Directory (Azure AD) tenant named AAD1.
        Subscription1 contains the objects in the following table:
        AZ-102 dumps exhibit
        You plan to create a single backup policy for Vault1. To answer, select the appropriate options in the answer area.
        NOTE: Each correct selection is worth one point.
        AZ-102 dumps exhibit

          Answer:

          Explanation: Box 1: RG1 only Box 2: 99 years
          With the latest update to Azure Backup, customers can retain their data for up to 99 years in Azure. Note: A backup policy defines a matrix of when the data snapshots are taken, and how long those snapshots are retained.
          The backup policy interface looks like this:
          AZ-102 dumps exhibit
          References: https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-lookarm# defining-a-backup-policy
          https://blogs.microsoft.com/firehose/2015/02/16/february-update-to-azure-backup-includes-dataretention- up-to-99-years-offline-backup-and-more/

          NEW QUESTION 9
          You have an Azure subscription that contains two resource groups named RG1 and RG2. RG2 does not contain any resources. RG1 contains the resources in the following table.
          AZ-102 dumps exhibit
          Which resource can you move to RG2?

          • A. W10_OsDisk
          • B. VNet1
          • C. VNet3
          • D. W10

          Answer: B

          Explanation: When moving a virtual network, you must also move its dependent resources. For example, you must move gateways with the virtual network. VM W10, which is in Vnet1, is not a dependent resource.
          Incorrect Answers:
          A: Managed disks don't support move.
          C: Virtual networks (classic) can't be moved.
          D: Virtual machines with the managed disks cannot be moved.
          References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-groupmove- resources#virtual-machines-limitations

          NEW QUESTION 10
          DRAG DROP
          You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs Windows Server 2016 and is part of an availability set.
          VM1 has virtual machine-level backup enabled. VM1 is deleted.
          You need to restore VM1 from the backup. VM1 must be part of the availability set.
          Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
          AZ-102 dumps exhibit

            Answer:

            Explanation: AZ-102 dumps exhibit

            NEW QUESTION 11
            SIMULATION
            Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
            AZ-102 dumps exhibit
            AZ-102 dumps exhibit
            AZ-102 dumps exhibit
            When you are finished performing all the tasks, click the ‘Next’ button.
            Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
            Overview
            The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
            Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
            Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
            To start the lab
            You may start the lab by clicking the Next button.
            Another administrator attempts to establish connectivity between two virtual networks named VNET1 and VNET2.
            The administrator reports that connections across the virtual networks fail.
            You need to ensure that network connections can be established successfully between VNET1 and VNET2 as quickly as possible.
            What should you do from the Azure portal?

              Answer:

              Explanation: You can connect one VNet to another VNet using either a Virtual network peering, or an Azure VPN Gateway.
              To create a virtual network gateway
              Step1 : In the portal, on the left side, click +Create a resource and type 'virtual network gateway' in search. Locate Virtual network gateway in the search return and click the entry. On the Virtual network gateway page, click Create at the bottom of the page to open the Create virtual network gateway page.
              Step 2: On the Create virtual network gateway page, fill in the values for your virtual network gateway.
              AZ-102 dumps exhibit
              AZ-102 dumps exhibit
              Name: Name your gateway. This is not the same as naming a gateway subnet. It's the name of the gateway object you are creating.
              Gateway type: Select VPN. VPN gateways use the virtual network gateway type VPN.
              Virtual network: Choose the virtual network to which you want to add this gateway. Click Virtual network to open the 'Choose a virtual network' page. Select the VNet. If you don't see your VNet, make sure the Location field is pointing to the region in which your virtual network is located. Gateway subnet address range: You will only see this setting if you did not previously create a gateway subnet for your virtual network. If you previously created a valid gateway subnet, this setting will not appear.
              Step 4: Select Create New to create a Gateway subnet.
              AZ-102 dumps exhibit
              Step 5: Click Create to begin creating the VPN gateway. The settings are validated and you'll see the "Deploying Virtual network gateway" tile on the dashboard. Creating a gateway can take up to 45 minutes. You may need to refresh your portal page to see the completed status.
              References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnetresource-manager-portal?

              NEW QUESTION 12
              You plan to migrate an on-premises Hyper-V environment to Azure by using Azure Site Recovery. The Hyper-V environment is managed by using Microsoft System Center Virtual Machine Manager (VMM).
              The Hyper-V environment contains the virtual machines in the following table.
              AZ-102 dumps exhibit
              Which virtual machine can be migrated by using Azure Site Recovery?

              • A. DC1
              • B. SQL1
              • C. CA1
              • D. FS1

              Answer: B

              Explanation: Up to 300 GB OS disk size is supported for generation 2 VMs and BitLocker is not enabled.

              NEW QUESTION 13
              HOT SPOT
              You have an Azure subscription named Subscription1. Subscription1 contains the virtual machines in the following table.
              AZ-102 dumps exhibit
              Subscription1 contains a virtual network named VNet1 that has the subnets in the following table.
              AZ-102 dumps exhibit
              VM3 has a network adapter named NIC3. IP forwarding is enabled on NIC3. Routing is enabled on VM3.
              You create a route table named RT1. RT1 is associated to Subnet1 and Subnet2 and contains the routes in the following table.
              AZ-102 dumps exhibit
              You apply RT1 to Subnet1.
              For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
              AZ-102 dumps exhibit

                Answer:

                Explanation: Box 1: Yes
                Traffic from VM1 and VM2 can reach VM3 thanks to the routing table, and as IP forwarding is enabled on VM3, traffic from VM3 can reach VM1.
                Box 2: No
                VM3, which has IP forwarding, must be turned on, in order for traffic from VM2 to reach VM1. Box 3: Yes
                The traffic from VM1 will reach VM3, which thanks to IP forwarding, will send the traffic to VM2. References: https://www.quora.com/What-is-IP-forwarding

                NEW QUESTION 14
                DRAG DROP
                You create an Azure Migrate project named TestMig in a resource group named test-migration. You need to discover which on-premises virtual machines to assess for migration.
                Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
                AZ-102 dumps exhibit

                  Answer:

                  Explanation: Step 1: Download the OVA file for the collection appliance
                  Azure Migrate uses an on-premises VM called the collector appliance, to discover information about your on-premises machines. To create the appliance, you download a setup file in Open Virtualization Appliance (.ova) format, and import it as a VM on your on-premises vCenter Server. Step 2: Create a migration group in the project
                  For the purposes of assessment, you gather the discovered VMs into groups. For example, you might group VMs that run the same application. For more precise grouping, you can use dependency visualization to view dependencies of a specific machine, or for all machines in a group and refine the group.
                  Step 3: Create an assessment in the project
                  After a group is defined, you create an assessment for it. References:
                  https://docs.microsoft.com/en-us/azure/migrate/migrate-overview

                  Case Study: 9
                  Mix Questions Set D (Implement advanced networking)

                  NEW QUESTION 15
                  You have a Recovery Service vault that you use to test backups. The test backups contain two protected virtual machines.
                  You need to delete the Recovery Services vault. What should you do first?

                  • A. From the Recovery Service vault, stop the backup of each backup item.
                  • B. From the Recovery Service vault, delete the backup data.
                  • C. Modify the disaster recovery properties of each virtual machine.
                  • D. Modify the locks of each virtual machin

                  Answer: A

                  Explanation: You can't delete a Recovery Services vault if it is registered to a server and holds backup data. If youtry to delete a vault, but can't, the vault is still configured to receive backup data. Remove vault dependencies and delete vault
                  In the vault dashboard menu, scroll down to the Protected Items section, and click Backup Items. In this menu, you can stop and delete Azure File Servers, SQL Servers in Azure VM, and Azure virtual machines.
                  AZ-102 dumps exhibit
                  References: https://docs.microsoft.com/en-us/azure/backup/backup-azure-delete-vault

                  NEW QUESTION 16
                  HOT SPOT
                  You have an Azure Active Directory (Azure AD) tenant that contains three global administrators named Admin1, Admin2, and Admin3.
                  The tenant is associated to an Azure subscription. Access control for the subscription is configured as shown in the Access control exhibit. (Click the Exhibit tab.)
                  AZ-102 dumps exhibit
                  You sign in to the Azure portal as Admin1 and configure the tenant as shown in the Tenant exhibit. (Click the Exhibit tab.)
                  AZ-102 dumps exhibit
                  For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
                  AZ-102 dumps exhibit

                    Answer:

                    Explanation: AZ-102 dumps exhibit

                    Recommend!! Get the Full AZ-102 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/AZ-102-dumps.html (New 195 Q&As Version)