Microsoft AZ-102 Study Guides 2019

AZ-102 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

https://www.2passeasy.com/dumps/AZ-102/

It is more faster and easier to pass the AZ-102 Study Guides by using AZ-102 Dumps. Immediate access to the AZ-102 Exam Questions and Answers and find the same core area AZ-102 Exam Dumps with professionally verified answers, then PASS your exam with a high score now.

Free demo questions for Microsoft AZ-102 Exam Dumps Below:

NEW QUESTION 1
You have an Azure subscription that contains three virtual networks named VNet1, VNet2, VNet3.
VNet2 contains a virtual appliance named VM2 that operates as a router.
You are configuring the virtual networks in a hub and spoke topology that uses VNet2 as the hub network.
You plan to configure peering between VNet1 and VNet2 and between VNet2 and VNet3. You need to provide connectivity between VNet1 and VNet3 through VNet2.
Which two configurations should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

  • A. On the peering connections, allow forwarded traffic.
  • B. On the peering connections, allow gateway transit.
  • C. Create route tables and assign the table to subnets.
  • D. Create a route filter.
  • E. On the peering connections, use remote gateway

Answer: BE

Explanation: Allow gateway transit: Check this box if you have a virtual network gateway attached to this virtual network and want to allow traffic from the peered virtual network to flow through the gateway. The peered virtual network must have the Use remote gateways checkbox checked when setting up the peering from the other virtual network to this virtual network.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-managepeering# requirements-and-constraints

NEW QUESTION 2
HOT SPOT
You need to prepare the environment to implement the planned changes for Server2. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-102 dumps exhibit

    Answer:

    Explanation: Box 1: Create a Recovery Services vault
    Create a Recovery Services vault on the Azure Portal. Box 2: Install the Azure Site Recovery Provider
    Azure Site Recovery can be used to manage migration of on-premises machines to Azure. Scenario: Migrate the virtual machines hosted on Server1 and Server2 to Azure.
    Server2 has the Hyper-V host role. References:
    https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-premises-azure

    Case Study: 8
    Mix Questions Set C (Evaluate and perform server migration to Azure)

    NEW QUESTION 3
    DRAG DROP
    You have an availability set named AS1 that contains three virtual machines named VM1, VM2, and VM3.
    You attempt to reconfigure VM1 to use a larger size. The operation fails and you receive an allocation failure message.
    You need to ensure that the resize operation succeeds.
    Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
    AZ-102 dumps exhibit

      Answer:

      Explanation: AZ-102 dumps exhibit

      NEW QUESTION 4
      HOT SPOT
      You need to recommend a solution for App1. The solution must meet the technical requirements. What should you include in the recommendation? To answer, select the appropriate options in the answer area.
      NOTE: Each correct selection is worth one point.
      AZ-102 dumps exhibit

        Answer:

        Explanation: This reference architecture shows how to deploy VMs and a virtual network configured for an N-tier application, using SQL Server on Windows for the data tier.
        AZ-102 dumps exhibit
        Scenario: You have a public-facing application named App1. App1 is comprised of the following three tiers:
        A SQL database A web front end
        A processing middle tier
        Each tier is comprised of five virtual machines. Users access the web front end by using HTTPS only. Technical requirements include:
        Move all the virtual machines for App1 to Azure. Minimize the number of open ports between the App1 tiers.
        References: https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/n-tier/n-tier-sql-server

        NEW QUESTION 5
        Note: This question is part of a series questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
        After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
        You manage a virtual network named Vnet1 that is hosted in the West US Azure region. VNet hosts two virtual machines named VM1 and VM2 run Windows Server.
        You need to inspect all the network traffic from VM1 to VM2 for a period of three hours. Solution: From Azure Network Watcher, you create a connection monitor.
        Does this meet the goal?

        • A. YES
        • B. NO

        Answer: A

        Explanation: Azure Network Watcher provides tools to monitor, diagnose, view metrics, and enable or disable logs for resources in an Azure virtual network.
        Capture packets to and from a VM
        Advanced filtering options and fine-tuned controls, such as the ability to set time and size limitations, provide versatility. The capture can be stored in Azure Storage, on the VM's disk, or both. You can then analyze the capture file using several standard network capture analysis tools.
        Network Watcher variable packet capture allows you to create packet capture sessions to track traffic to and from a virtual machine. Packet capture helps to diagnose network anomalies both reactively and proactivity.
        References:
        https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-monitoring-overview

        NEW QUESTION 6
        SIMULATION
        Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        When you are finished performing all the tasks, click the ‘Next’ button.
        Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
        Overview
        The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
        Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
        Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
        To start the lab
        You may start the lab by clicking the Next button.
        You need to deploy an Azure virtual machine named VM1004a based on the Ubuntu Server 17.10 image, and then to configure VM1004a to meet the following requirements:
        The virtual machine must contain data disks that can store at least 15 TB of data. The data disks must be able to provide at least 2,000 IOPS.
        Storage costs must be minimized.
        What should you do from the Azure portal?

          Answer:

          Explanation: 1. Open the Azure portal.
          2. On the left menu, select All resources. You can sort the resources by Type to easily find your images.
          3. Select the image you want to use from the list. The image Overview page opens.
          4. Select Create VM from the menu.
          5. Enter the virtual machine information.
          Select VM1004a as the name for the first Virtual machine.
          The user name and password entered here will be used to log in to the virtual machine. When complete, select OK. You can create the new VM in an existing resource group, or choose Create new to create a new resource group to store the VM.
          6. Select a size for the VM. To see more sizes, select View all or change the Supported disk type filter. To support 15 TB of data you would need a Premium disk.
          7. Under Settings, make changes as necessary and select OK.
          8. On the summary page, you should see your image name listed as a Private image. Select Ok to start the virtual machine deployment.
          References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/create-vmgeneralized- managed

          NEW QUESTION 7
          You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine named VM1.
          You have a computer named Computer1 that runs Windows 10. Computer1 is connected to the Internet.
          You add a network interface named Interface1 to VM1 as shown in the exhibit (Click the Exhibit button.)
          AZ-102 dumps exhibit
          From Computer1, you attempt to connect to VM1 by using Remote Desktop, but the connection fails. You need to establish a Remote Desktop connection to VM1.
          What should you do first?

          • A. Start VM1.
          • B. Attach a network interface.
          • C. Delete the DenyAllOutBound outbound port rule.
          • D. Delete the DenyAllInBound inbound port rul

          Answer: A

          Explanation: Incorrect Answers:
          B: The network interface has already been added to VM. C: The Outbound rules are fine.
          D: The inbound rules are fine. Port 3389 is used for Remote Desktop.
          Note: Rules are processed in priority order, with lower numbers processed before higher numbers, because lower numbers have higher priority. Once traffic matches a rule, processing stops. As a result, any rules that exist with lower priorities (higher numbers) that have the same attributes as rules with higher priorities are not processed.
          References: https://docs.microsoft.com/en-us/azure/virtual-network/security-overview

          NEW QUESTION 8
          HOT SPOT
          You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine named VM1.
          You install and configure a web server and a DNS server on VM1.
          VM1 has the effective network security rules shown in the following exhibit.
          AZ-102 dumps exhibit
          Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
          NOTE: Each correct selection is worth one point.
          AZ-102 dumps exhibit

            Answer:

            Explanation: AZ-102 dumps exhibit

            NEW QUESTION 9
            HOT SPOT
            You have an Azure subscription named Subscription1. Subscription1 contains the virtual networks in the following table.
            AZ-102 dumps exhibit
            Subscription1 contains the virtual machines in the following table:
            AZ-102 dumps exhibit
            The firewalls on all the virtual machines are configured to allow all ICMP traffic. You add the peerings in the following table.
            AZ-102 dumps exhibit
            For each of the following statements, select Yest if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
            AZ-102 dumps exhibit

              Answer:

              Explanation: Box 1: Yes
              Vnet1 and Vnet3 are peers. Box 2: Yes
              Vnet2 and Vnet3 are peers. Box 3: No
              Peering connections are non-transitive.
              References: https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybridnetworking/ hub-spoke

              NEW QUESTION 10
              You configure Azure AD Connect for Azure Active Directory Seamless Single Sign-On (Azure AD Seamless SSO) for an on-premises network. Users report that when they attempt to access myapps.microsoft.com, they are prompted multiple times to sign in and are forced to use an account name that ends with onmicrosoft.com.
              You discover that there is a UPN mismatch between Azure AD and the on-premises Active Directory. You need to ensure that the users can use single-sign on (SSO) to access Azure resources.
              What should you do first?

              • A. From the on-premises network, deploy Active Directory Federation Services (AD FS).
              • B. From Azure AD, add and verify a custom domain name.
              • C. From the on-premises network, request a new certificate that contains the Active Directory domain name.
              • D. From the server that runs Azure AD Connect, modify the filtering option

              Answer: B

              Explanation: Azure AD Connect lists the UPN suffixes that are defined for the domains and tries to match them
              with a custom domain in Azure AD. Then it helps you with the appropriate action that needs to be taken. The Azure AD sign-in page lists the UPN suffixes that are defined for on-premises Active Directory and displays the corresponding status against each suffix. The status values can be one of the following:
              State: Verified Azure AD Connect found a matching verified domain in Azure AD. All users for this domain can sign in by using their on-premises credentials.
              State: Not verified Azure AD Connect found a matching custom domain in Azure AD, but it isn't verified. The UPN suffix of the users of this domain will be changed to the default .onmicrosoft.com suffix after synchronization if the domain isn't verified.
              Action Required: Verify the custom domain in Azure AD.
              References: https://docs.microsoft.com/en-us/azure/active-directory/hybrid/plan-connect-userQuestions& Answers PDF P-80 signin

              NEW QUESTION 11
              You need to create a function app named corp7509086nl that supports sticky sessions. The solution must minimize the Azure-related costs of the App Service plan.
              What should you do from the Azure portal?

                Answer:

                Explanation: Step 1:
                Select the New button found on the upper left-hand corner of the Azure portal, then select Compute
                > Function App. Step 2:
                Use the function app settings as listed below. App name: corp7509086n1
                Hosting plan: Azure App Service plan (need this for the sticky sessions)
                Pricing tier of the the App Service plan: Shared compute: Free Step 3:
                Select Create to provision and deploy the function app. References:
                https://docs.microsoft.com/en-us/azure/azure-functions/functions-create-function-app-portal

                NEW QUESTION 12
                You plan to support many connections to your company's automatically uses up to five instances when CPU utilization on the instances exceeds 70 percent for 10 minutes. When CPU utilization decreases, the solution must automatically reduce the number of instances.
                What should you do from the Azure portal?

                  Answer:

                  Explanation: Step 1:
                  Locate the Homepage App Service plan Step 2:
                  Click Add a rule, and enter the appropriate fields, such as below, and the click Add. Time aggregation: average
                  Metric Name: Percentage CPU Operator: Greater than Threshold 70
                  Duration: 10 minutes Operation: Increase count by Instance count: 4
                  AZ-102 dumps exhibit
                  Step 3:
                  We must add a scale in rule as well. Click Add a rule, and enter the appropriate fields, such as below, then click Add.
                  Operator: Less than
                  Threshold 70
                  Duration: 10 minutes Operation: Decrease count by Instance count: 4 References:
                  https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-setsautoscale- portal
                  https://docs.microsoft.com/en-us/azure/monitoring-and-diagnostics/insights-autoscale-bestpractices

                  NEW QUESTION 13
                  You have an Azure Active Directory (Azure AD) tenant named Tenant1 and an Azure subscription named You enable Azure AD Privileged Identity Management.
                  You need to secure the members of the Lab Creator role. The solution must ensure that the lab creators request access when they create labs.
                  What should you do first?

                  • A. From Azure AD Privileged Identity Management, edit the role settings for Lab Creator.
                  • B. From Subscription1 edit the members of the Lab Creator role.
                  • C. From Azure AD Identity Protection, creates a user risk policy.
                  • D. From Azure AD Privileged Identity Management, discover the Azure resources of Conscriptio

                  Answer: A

                  Explanation: As a Privileged Role Administrator you can: Enable approval for specific roles
                  Specify approver users and/or groups to approve requests View request and approval history for all privileged roles References:
                  https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pimconfigure

                  NEW QUESTION 14
                  You create a new replication policy in Azure for the physical servers. You successfully complete the following actions:
                  Create and configure a Recovery Services vault.
                  Ensure Internet connectivity.
                  Ensure that the required URLs are reachable.
                  Ensure that the host server requirements are met.
                  Ensure that the servers marked for replication comply with the requirements of the Azure virtual machines.
                  You need to replicate the on-premises servers to Azure.
                  Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
                  NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
                  AZ-102 dumps exhibit

                    Answer:

                    Explanation: Step 2: Deploy the OVF template Set up the source environment.
                    Download the OVF template for the configuration server, and import the template in VMware.
                    Note: Open Virtualization Format (OVF) template is an industry standard software distribution model for virtual machine templates. Starting January 2018, configuration server for the VMware to Azure scenario will be available to all our customers as an OVF template.
                    Step 3: Associate the configuration server to the replication policy Associate the replication policy with your on-premises configuration server. Step 4: Enable replication
                    References:
                    https://docs.microsoft.com/en-us/azure/site-recovery/vmware-azure-set-up-replication

                    NEW QUESTION 15
                    You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com. Your company has a public DNS zone for contoso.com.
                    You add contoso.com as a custom domain name to Azure AD You need to ensure that Azure can verify the domain name. Which type of DNS record should you create?

                    • A. PTR
                    • B. MX
                    • C. NSEC3
                    • D. RRSIG

                    Answer: B

                    Explanation: To verify your custom domain name (example)
                    Sign in to the Azure portal using a Global administrator account for the directory. Select Azure Active Directory, and then select Custom domain names.
                    On the Fabrikam - Custom domain names page, select the custom domain name, Contoso.
                    On the Contoso page, select Verify to make sure your custom domain is properly registered and is valid for Azure AD. Use either the TXT or the MX record type.
                    AZ-102 dumps exhibit
                    References:
                    https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-domain

                    NEW QUESTION 16
                    Your Azure environment contains an application gateway and custom apps.
                    Another administrator modifies the application gateway and the apps to use HTTP over TCP port 8080.
                    Users report that they can no longer connect to the apps.
                    You suspect that the cause of the issue is a change in the configuration of the application gateway. You need to modify the application gateway to resolve the issue.
                    What should you do from the Azure portal?

                      Answer:

                      Explanation: Step 1:
                      Select Networking and then select Application Gateway in the Featured list, and select the application gateway, and select the settings.
                      Step 2:
                      Click HTTP for the protocol of the listener and make sure that the port is defined as 443.
                      AZ-102 dumps exhibit
                      References:
                      https://docs.microsoft.com/en-us/azure/application-gateway/create-ssl-portal

                      P.S. Easily pass AZ-102 Exam with 195 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam AZ-102 Dumps: https://www.surepassexam.com/AZ-102-exam-dumps.html (195 New Questions)