Exam Code: NSE4 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Fortinet Network Security Expert 4 Written Exam (400)
Certification Provider: Fortinet
Free Today! Guaranteed Training- Pass NSE4 Exam.
2016 Apr NSE4 Study Guide Questions:
Q61. - (Topic 18)
When the SSL proxy is NOT doing man-in-the-middle interception of SSL traffic, which certificate field can be used to determine the rating of a website?
A. Organizational Unit.
B. Common Name.
C. Serial Number.
Q62. - (Topic 15)
Which statement is an advantage of using a hub and spoke IPsec VPN configuration
instead of a fully-meshed set of IPsec tunnels?
A. Using a hub and spoke topology provides full redundancy.
B. Using a hub and spoke topology requires fewer tunnels.
C. Using a hub and spoke topology uses stronger encryption protocols.
D. Using a hub and spoke topology requires more routes.
Q63. - (Topic 22)
Two FortiGate units with NP6 processors form an active-active cluster. The cluster is doing security profile (UTM) inspection over all the user traffic. What statements are true regarding the sessions that the master unit is offloading to the slave unit for inspection? (Choose two.)
A. They are accelerated by hardware in the master unit.
B. They are not accelerated by hardware in the master unit.
C. They are accelerated by hardware in the slave unit.
D. They are not accelerated by hardware in the slave unit.
Q64. - (Topic 3)
Which firewall objects can be included in the Destination Address field of a firewall policy? (Choose three.)
A. IP address pool.
B. Virtual IP address.
C. IP address.
D. IP address group.
E. MAC address.
Q65. - (Topic 17)
Which statement describes what the CLI command diagnose debug authd fsso list is used for?
A. Monitors communications between the FSSO collector agent and FortiGate unit.
B. Displays which users are currently logged on using FSSO.
C. Displays a listing of all connected FSSO collector agents.
D. Lists all DC Agents installed on all domain controllers.
Regenerate NSE4 free practice exam:
Q66. - (Topic 20)
Examine at the output below from the diagnose sys top command: # diagnose sys top 1 Run Time: 11 days, 3 hours and 29 minutes 0U, 0N, 1S, 99I; 971T, 528F, 160KF sshd 123 S 1.9 1.2 ipsengine 61 S < 0.0 5.2 miglogd 45 S 0.0 4.9
pyfcgid 75 S 0.0 4.5
pyfcgid 73 S 0.0 3.9
Which statements are true regarding the output above? (Choose two.)
A. The sshd process is the one consuming most CPU.
B. The sshd process is using 123 pages of memory.
C. The command diagnose sys kill miglogd will restart the miglogd process.
D. All the processes listed are in sleeping state.
Q67. - (Topic 3)
For traffic that does match any configured firewall policy, what is the default action taken by the FortiGate?
A. The traffic is allowed and no log is generated.
B. The traffic is allowed and logged.
C. The traffic is blocked and no log is generated.
D. The traffic is blocked and logged.
Q68. - (Topic 4)
What methods can be used to deliver the token code to a user that is configured to use two-factor authentication? (Choose three.)
A. Browser pop-up window.
D. Code books.
E. SMS phone message.
Q69. - (Topic 21)
Which statements are true regarding IPv6 anycast addresses? (Choose two.)
A. Multiple interfaces can share the same anycast address.
B. They are allocated from the multicast address space.
C. Different nodes cannot share the same anycast address.
D. An anycast packet is routed to the nearest interface.
Q70. - (Topic 16)
Examine the following log message for IPS:
2012-07-01 09:54:28 oid=2 log_id=18433 type=ips subtype=anomaly pri=alert vd=root severity="critical" src="192.168.3.168" dst="192.168.3.170" src_int="port2" serial=0 status="detected" proto=1 service="icmp" count=1 attack_name="icmp_flood" icmp_id="0xa8a4" icmp_type="0x08" icmp_code="0x00" attack_id=16777316 sensor="1" ref="http://www.fortinet.com/ids/VID16777316" msg="anomaly: icmp_flood, 51 > threshold 50"
Which statement is correct about the above log? (Choose two.)
A. The target is 192.168.3.168.
B. The target is 192.168.3.170.
C. The attack was NOT blocked.
D. The attack was blocked.
Simulation NSE4 practice exam:
Q71. - (Topic 18)
Which tasks fall under the responsibility of the SSL proxy in a typical HTTPS connection? (Choose two.)
A. The web client SSL handshake.
B. The web server SSL handshake.
C. File buffering.
D. Communication with the URL filter process.
Q72. - (Topic 1)
Which statements are true regarding the factory default configuration? (Choose three.)
A. The default web filtering profile is applied to the first firewall policy.
B. The ‘Port1’ or ‘Internal’ interface has the IP address 192.168.1.99.
C. The implicit firewall policy action is ACCEPT.
D. The ‘Port1’ or ‘Internal’ interface has a DHCP server set up and enabled (on device models that support DHCP servers).
E. Default login uses the username: admin (all lowercase) and no password.
Q73. - (Topic 12)
A FortiGate is operating in NAT/Route mode and configured with two virtual LAN (VLAN) sub-interfaces added to the same physical interface.
Which one of the following statements is correct regarding the VLAN IDs in this scenario?
A. The two VLAN sub-interfaces can have the same VLAN ID only if they have IP addresses in different subnets.
B. The two VLAN sub-interfaces must have different VLAN IDs.
C. The two VLAN sub-interfaces can have the same VLAN ID only if they belong to different VDOMs.
D. The two VLAN sub-interfaces can have the same VLAN ID if they are connected to different L2 IEEE 802.1Q compliant switches.
Q74. - (Topic 5)
Regarding the use of web-only mode SSL VPN, which statement is correct?
A. It supports SSL version 3 only.
B. It requires a Fortinet-supplied plug-in on the web client.
C. It requires the user to have a web browser that supports 64-bit cipher length.
D. The JAVA run-time environment must be installed on the client.
Q75. - (Topic 6)
You are the administrator in charge of a FortiGate acting as an IPsec VPN gateway using route-based mode. Users from either side must be able to initiate new sessions. There is only 1 subnet at either end and the FortiGate already has a default route.
Which two configuration steps are required to achieve these objectives? (Choose two.)
A. Create one firewall policy.
B. Create two firewall policies.
C. Add a route to the remote subnet.
D. Add two IPsec phases 2.
see more Fortinet Network Security Expert 4 Written Exam (400)